EPCS1SI8N
IC CONFIG DEVICE 1MBIT 8SOIC
封装/箱体
8-SOIC (0.154", 3.90mm Width)
可编程类型
In System Programmable
请求报价
请填写所有必填字段并点击“提交”,我们将在12小时内通过电子邮件与您联系。如果您有任何问题,请留言或发送电子邮件至 2762329346@qq.com,我们将尽快回复。
有货 15997 PCS
more_spec
About Altera Corporation
Altera Corporation was an American manufacturer of programmable logic devices (PLDs), reconfigurable complex digital circuits. It was acquired by Intel Corporation in 2015 and is now a subsidiary of Intel.
Founded in 1983, Altera was one of the pioneers in the field of programmable logic, offering a range of PLD products including field-programmable gate arrays (FPGAs), complex programmable logic devices (CPLDs), and specialized chips for digital signal processing and memory interface functions. The company's products were used in a variety of applications including communication systems, industrial automation, medical equipment, and military systems.
Altera was known for its innovation in the PLD market, including the development of high-density FPGAs and low-power, high-performance CPLDs. With its acquisition by Intel, Altera continues to provide PLD solutions for its customers, leveraging the resources and technology of one of the world's largest technology companies.
*This information is for general informational purposes only, we will not be liable for any loss or damage caused by the above information.
more_desctext
EPCS1SI8 configuration memory, SO8 EPCS1SI8N, Configuration Memory 20MHz 2.7 → 3.6 V 8-Pin SOIC
Pin Count--------8
Part Category--------Integrated Circuit
Package Category--------Small Outline Packages
Footprint Name--------Small Outline Packages - 8-Pin Small Outline Integrated Circuit Package (SOIC) - Wire Bond
more_faq
EPCS1SI8N Frequently Asked Questions (FAQs)
What is the recommended operating voltage range for the EPCS1SI8N?
The recommended operating voltage range for the EPCS1SI8N is 2.7V to 3.6V.
How do I ensure data integrity during power-down or power-up sequences?
To ensure data integrity during power-down or power-up sequences, it is recommended to follow the power-up and power-down sequencing guidelines provided in the datasheet, and to use a voltage supervisor or reset circuit to ensure that the device is properly initialized.
What is the maximum clock frequency supported by the EPCS1SI8N?
The maximum clock frequency supported by the EPCS1SI8N is 66 MHz.
How do I handle errors during programming or reading of the EPCS1SI8N?
In case of errors during programming or reading, the device provides error detection and correction mechanisms such as ECC (Error-Correcting Code) and CRC (Cyclic Redundancy Check). The host system should implement error handling mechanisms to detect and correct errors.
What is the typical programming time for the EPCS1SI8N?
The typical programming time for the EPCS1SI8N is around 10-15 seconds for a full 8Mb device, but this can vary depending on the programming algorithm and the host system.