ST (STMicroelectronics)
图片可能具有代表性。
产品详情请参阅规格.
产品详情请参阅规格.
LSM6DSLTR
LSM6DSLTR
型号
LSM6DSLTR
类目
Sensors > Attitude Sensor/Gyroscope
制造商/品牌
ST (STMicroelectronics)
封装
LGA-14
包装
taping
包裹数量
5000
简介
IMU - Inertial Measurement Unit
请求报价
请填写所有必填字段并点击“提交”，我们将在12小时内通过电子邮件与您联系。如果您有任何问题，请留言或发送电子邮件至 2762329346@qq.com，我们将尽快回复。
有货 63669 PCS
联系信息
more_pkgimg
more_schimg
more_3dimg
more_spec
About STMicroelectronics
STMicroelectronics is a multinational electronics and semiconductor manufacturer based in Geneva, Switzerland.
The company offers a wide range of products including microcontrollers, sensors, power amplifiers, and integrated circuits for various applications in the automotive, industrial, and consumer markets.
Founded in 1987, STMicroelectronics has operations in over 100 countries and is one of the largest semiconductor companies in the world.
*This information is for general informational purposes only, we will not be liable for any loss or damage caused by the above information.
STMicroelectronics is a multinational electronics and semiconductor manufacturer based in Geneva, Switzerland.
The company offers a wide range of products including microcontrollers, sensors, power amplifiers, and integrated circuits for various applications in the automotive, industrial, and consumer markets.
Founded in 1987, STMicroelectronics has operations in over 100 countries and is one of the largest semiconductor companies in the world.
*This information is for general informational purposes only, we will not be liable for any loss or damage caused by the above information.
more_desctext
IMUs - Inertial Measurement Units CONSUMER MEMS
Pin Count--------14
Part Category--------Integrated Circuit
Package Category--------Other
Footprint Name--------Other - LGA-14(2.5x3x0.86)_2020
Pin Count--------14
Part Category--------Integrated Circuit
Package Category--------Other
Footprint Name--------Other - LGA-14(2.5x3x0.86)_2020
download_pdf
more_faq
LSM6DSLTR Frequently Asked Questions (FAQs)
What is the recommended power-on sequence for the LSM6DSLTR?
The recommended power-on sequence is to power up the VDDIO pin first, followed by the VDD pin. This ensures that the internal regulators are properly initialized.
How do I configure the LSM6DSLTR for optimal performance?
To configure the LSM6DSLTR for optimal performance, set the ODR (Output Data Rate) to the desired value, adjust the full-scale range (FSR) according to the application requirements, and enable the desired axes (accelerometer and/or gyroscope).
What is the purpose of the INT1 and INT2 pins?
The INT1 and INT2 pins are interrupt pins that can be configured to generate interrupts based on specific events, such as data ready, FIFO threshold, or sensor thresholds. They can be used to wake up the microcontroller from sleep mode or to trigger specific actions.
How do I handle the FIFO (First-In-First-Out) buffer in the LSM6DSLTR?
The FIFO buffer can be configured to store sensor data, and the FIFO threshold can be set to generate an interrupt when the buffer is full or reaches a certain level. The FIFO can be read using the SPI or I2C interface.
What is the difference between the LSM6DSLTR and the LSM6DS3TR?
The main difference is that the LSM6DSLTR has a higher accelerometer full-scale range (up to ±16g) and a higher gyroscope full-scale range (up to ±2000 dps) compared to the LSM6DS3TR. The LSM6DSLTR also has a lower noise density and a higher resolution.
What is the recommended power-on sequence for the LSM6DSLTR?
The recommended power-on sequence is to power up the VDDIO pin first, followed by the VDD pin. This ensures that the internal regulators are properly initialized.
How do I configure the LSM6DSLTR for optimal performance?
To configure the LSM6DSLTR for optimal performance, set the ODR (Output Data Rate) to the desired value, adjust the full-scale range (FSR) according to the application requirements, and enable the desired axes (accelerometer and/or gyroscope).
What is the purpose of the INT1 and INT2 pins?
The INT1 and INT2 pins are interrupt pins that can be configured to generate interrupts based on specific events, such as data ready, FIFO threshold, or sensor thresholds. They can be used to wake up the microcontroller from sleep mode or to trigger specific actions.
How do I handle the FIFO (First-In-First-Out) buffer in the LSM6DSLTR?
The FIFO buffer can be configured to store sensor data, and the FIFO threshold can be set to generate an interrupt when the buffer is full or reaches a certain level. The FIFO can be read using the SPI or I2C interface.
What is the difference between the LSM6DSLTR and the LSM6DS3TR?
The main difference is that the LSM6DSLTR has a higher accelerometer full-scale range (up to ±16g) and a higher gyroscope full-scale range (up to ±2000 dps) compared to the LSM6DS3TR. The LSM6DSLTR also has a lower noise density and a higher resolution.
相关产品
关键词 LSM6DSLTR
LSM6DSLTR 电子元件
LSM6DSLTR 销售
LSM6DSLTR 供应商
LSM6DSLTR 分销商
LSM6DSLTR 数据表
LSM6DSLTR 图片
LSM6DSLTR 报价
LSM6DSLTR 提供
LSM6DSLTR 最低价格
LSM6DSLTR 搜索
LSM6DSLTR 购买
LSM6DSLTR 芯片
×
![]()