TDK InvenSense (InvenSense)
图片可能具有代表性。
产品详情请参阅规格.
产品详情请参阅规格.
ICM-20602
ICM-20602
型号
ICM-20602
类目
Sensors > Attitude Sensor/Gyroscope
制造商/品牌
TDK InvenSense (InvenSense)
封装
LGA-16
包装
taping
包裹数量
5000
简介
请求报价
请填写所有必填字段并点击“提交”，我们将在12小时内通过电子邮件与您联系。如果您有任何问题，请留言或发送电子邮件至 2762329346@qq.com，我们将尽快回复。
有货 69781 PCS
联系信息
more_pkgimg
more_schimg
more_3dimg
more_spec
About TDK Electronics
TDK Electronics is a subsidiary of TDK Corporation, a multinational electronics company based in Japan.
TDK Electronics specializes in the design and manufacture of electronic components such as capacitors, inductors, and ferrite beads for use in a wide range of applications including consumer electronics, automobiles, and industrial systems.
The company is known for its high-quality products and innovative solutions, and it has a strong reputation in the electronics industry.
*This information is for general informational purposes only, we will not be liable for any loss or damage caused by the above information.
more_desctext
IMUs - Inertial Measurement Units Low-Power, High-Performance Integrated 6-Axis MEMS MotionTracking Device in 3mm x 3mm Package
Pin Count--------16
Part Category--------Integrated Circuit
Package Category--------Other
Footprint Name--------Other - 16 Lead LGA (3x3x0.75)-1-1
Pin Count--------16
Part Category--------Integrated Circuit
Package Category--------Other
Footprint Name--------Other - 16 Lead LGA (3x3x0.75)-1-1
download_pdf
more_faq
ICM-20602 Frequently Asked Questions (FAQs)
What is the recommended power-on sequence for the ICM-20602?
The recommended power-on sequence is to power up the VDDIO pin first, followed by the VDD pin. This ensures that the internal voltage regulators are powered up correctly.
How do I configure the ICM-20602 for low-power mode?
To configure the ICM-20602 for low-power mode, set the LP_MODE bit in the POWER_CTL register to '1'. This reduces the current consumption of the device.
What is the maximum acceleration range of the ICM-20602?
The maximum acceleration range of the ICM-20602 is ±30g. However, the device can be configured to measure accelerations up to ±16g or ±8g depending on the FS_SEL setting.
How do I calibrate the ICM-20602?
The ICM-20602 does not require calibration. The device is factory-calibrated and the calibration data is stored in the device's internal memory.
What is the maximum data rate of the ICM-20602?
The maximum data rate of the ICM-20602 is 32 kHz. However, the device can be configured to output data at lower rates, such as 1 kHz or 200 Hz, depending on the application requirements.
What is the recommended power-on sequence for the ICM-20602?
The recommended power-on sequence is to power up the VDDIO pin first, followed by the VDD pin. This ensures that the internal voltage regulators are powered up correctly.
How do I configure the ICM-20602 for low-power mode?
To configure the ICM-20602 for low-power mode, set the LP_MODE bit in the POWER_CTL register to '1'. This reduces the current consumption of the device.
What is the maximum acceleration range of the ICM-20602?
The maximum acceleration range of the ICM-20602 is ±30g. However, the device can be configured to measure accelerations up to ±16g or ±8g depending on the FS_SEL setting.
How do I calibrate the ICM-20602?
The ICM-20602 does not require calibration. The device is factory-calibrated and the calibration data is stored in the device's internal memory.
What is the maximum data rate of the ICM-20602?
The maximum data rate of the ICM-20602 is 32 kHz. However, the device can be configured to output data at lower rates, such as 1 kHz or 200 Hz, depending on the application requirements.
相关产品
关键词 ICM-20602
ICM-20602 电子元件
ICM-20602 销售
ICM-20602 供应商
ICM-20602 分销商
ICM-20602 数据表
ICM-20602 图片
ICM-20602 报价
ICM-20602 提供
ICM-20602 最低价格
ICM-20602 搜索
ICM-20602 购买
ICM-20602 芯片
×
![]()