MAX98357AETE+T
IC AUDIO AMP CLASS D 16-TQFN
型号
MAX98357AETE+T
制造商/品牌
系列
-
零件状态
Active
包装
Tape & Reel (TR)
工作温度
-40°C ~ 85°C (TA)
安装类型
Surface Mount
特征
Depop, Short-Circuit and Thermal Protection
封装/箱体
16-WFQFN Exposed Pad
类型
Class D
输出类型
2-Channel (Stereo)
供应商器件封装
16-TQFN (3x3)
电压 - 电源
2.5 V ~ 5.5 V
最大输出功率 x 通道数 @ 负载
3.2W x 2 @ 4 Ohm
请求报价
请填写所有必填字段并点击“提交”，我们将在12小时内通过电子邮件与您联系。如果您有任何问题，请留言或发送电子邮件至 2762329346@qq.com，我们将尽快回复。
有货 20332 PCS
联系信息
more_pkgimg
more_schimg
more_3dimg
more_spec
About Maxim Integrated Products
Maxim Integrated Products is a publicly traded company that designs, develops, and sells a wide range of high-performance analog and mixed-signal integrated circuits (ICs).
The company was founded in 1983 and is headquartered in San Jose, California.
Maxim Integrated Products serves customers in a variety of markets, including communications, computing, consumer, industrial, medical, and automotive.
The company offers a comprehensive portfolio of products, including data converters, amplifiers and comparators, power management ICs, microcontrollers, security and protection devices, and sensors, among others.
Maxim Integrated Products is dedicated to innovation and customer satisfaction, and is committed to delivering high-quality, reliable solutions to its customers.
With a focus on energy efficiency and sustainability, Maxim Integrated Products is at the forefront of the semiconductor industry, driving technological advancements in the fields of analog and mixed-signal ICs.
*This information is for general informational purposes only, we will not be liable for any loss or damage caused by the above information.
more_desctext
Audio Amplifiers Digital Input Class D Amplifier
Pin Count--------17
Part Category--------Integrated Circuit
Package Category--------Quad Flat No-Lead
Footprint Name--------Quad Flat No-Lead - Max 21-0136_T1633-4
Pin Count--------17
Part Category--------Integrated Circuit
Package Category--------Quad Flat No-Lead
Footprint Name--------Quad Flat No-Lead - Max 21-0136_T1633-4
download_pdf
more_faq
MAX98357AETE+T Frequently Asked Questions (FAQs)
What is the recommended PCB layout for the MAX98357AETE+T to minimize EMI and noise?
A 4-layer PCB with a solid ground plane and a separate analog ground plane is recommended. Keep the analog and digital grounds separate and connect them at a single point. Use a star topology for the power supply and keep the audio signals away from the digital signals.
How do I optimize the MAX98357AETE+T for low power consumption?
To optimize for low power consumption, use the lowest possible supply voltage, disable the amplifier when not in use, and adjust the gain settings to minimize power consumption. Additionally, use the shutdown mode to reduce power consumption when the device is not in use.
What is the recommended clock frequency for the MAX98357AETE+T?
The recommended clock frequency for the MAX98357AETE+T is 12.288 MHz, which is the standard frequency for audio applications. However, the device can operate with clock frequencies between 10 MHz and 50 MHz.
How do I troubleshoot audio distortion or noise issues with the MAX98357AETE+T?
To troubleshoot audio distortion or noise issues, check the PCB layout for any noise coupling or EMI issues. Verify that the power supply is clean and stable, and that the analog and digital grounds are properly separated. Also, check the gain settings and adjust them if necessary.
Can I use the MAX98357AETE+T with a different voltage supply than the recommended 1.8V to 3.6V?
While the MAX98357AETE+T is specified to operate from 1.8V to 3.6V, it can operate with a voltage supply as low as 1.5V or as high as 5.5V. However, the device's performance and power consumption may vary outside the recommended voltage range.
What is the recommended PCB layout for the MAX98357AETE+T to minimize EMI and noise?
A 4-layer PCB with a solid ground plane and a separate analog ground plane is recommended. Keep the analog and digital grounds separate and connect them at a single point. Use a star topology for the power supply and keep the audio signals away from the digital signals.
How do I optimize the MAX98357AETE+T for low power consumption?
To optimize for low power consumption, use the lowest possible supply voltage, disable the amplifier when not in use, and adjust the gain settings to minimize power consumption. Additionally, use the shutdown mode to reduce power consumption when the device is not in use.
What is the recommended clock frequency for the MAX98357AETE+T?
The recommended clock frequency for the MAX98357AETE+T is 12.288 MHz, which is the standard frequency for audio applications. However, the device can operate with clock frequencies between 10 MHz and 50 MHz.
How do I troubleshoot audio distortion or noise issues with the MAX98357AETE+T?
To troubleshoot audio distortion or noise issues, check the PCB layout for any noise coupling or EMI issues. Verify that the power supply is clean and stable, and that the analog and digital grounds are properly separated. Also, check the gain settings and adjust them if necessary.
Can I use the MAX98357AETE+T with a different voltage supply than the recommended 1.8V to 3.6V?
While the MAX98357AETE+T is specified to operate from 1.8V to 3.6V, it can operate with a voltage supply as low as 1.5V or as high as 5.5V. However, the device's performance and power consumption may vary outside the recommended voltage range.
相关产品
关键词 MAX98357AETE+T
MAX98357AETE+T 电子元件
MAX98357AETE+T 销售
MAX98357AETE+T 供应商
MAX98357AETE+T 分销商
MAX98357AETE+T 数据表
MAX98357AETE+T 图片
MAX98357AETE+T 报价
MAX98357AETE+T 提供
MAX98357AETE+T 最低价格
MAX98357AETE+T 搜索
MAX98357AETE+T 购买
MAX98357AETE+T 芯片
×
![]()