Vishay Semiconductor Diodes Division
图片可能具有代表性。
产品详情请参阅规格.
SS8P2CLHM3_A/H
查看详情 数据表

SS8P2CLHM3_A/H

Product Overview

Category: Integrated Circuits
Use: Power Management IC
Characteristics: High efficiency, compact size, low power consumption
Package: 8-pin SOIC
Essence: Regulates and manages power supply
Packaging/Quantity: Tape & Reel, 2500 units per reel

Specifications

  • Input Voltage Range: 4.5V to 18V
  • Output Voltage: Adjustable from 0.8V to 16V
  • Maximum Output Current: 3A
  • Switching Frequency: 1.5MHz
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. FB (Feedback)
  4. EN (Enable)
  5. SW (Switch)
  6. AGND (Analog Ground)
  7. PGND (Power Ground)
  8. VOUT (Output Voltage)

Functional Features

  • Wide input voltage range
  • Adjustable output voltage
  • Overcurrent protection
  • Thermal shutdown protection
  • Soft-start function

Advantages and Disadvantages

Advantages: - High efficiency - Compact size - Low power consumption - Comprehensive protection features

Disadvantages: - Limited maximum output current - Requires external components for operation

Working Principles

The SS8P2CLHM3_A/H is a step-down switching regulator that efficiently converts higher input voltages to lower output voltages. It uses pulse-width modulation (PWM) to regulate the output voltage and provides various protection features to ensure safe and reliable operation.

Detailed Application Field Plans

The SS8P2CLHM3_A/H is suitable for a wide range of applications including: - Portable electronic devices - Automotive systems - Industrial equipment - LED lighting - Distributed power systems

Detailed and Complete Alternative Models

  1. LM2675-ADJ/NOPB
  2. LT1763-3.3
  3. TPS54332DDAR

This concludes the English editing encyclopedia entry structure for SS8P2CLHM3_A/H.

10个与SS8P2CLHM3_A/H在技术解决方案中的应用相关的常见问题及解答

  1. What is SS8P2CLHM3_A/H?

    • SS8P2CLHM3_A/H is a high-performance semiconductor component used in technical solutions for power management and control.

  2. What are the key features of SS8P2CLHM3_A/H?

    • The key features of SS8P2CLHM3_A/H include high efficiency, low power consumption, and robust thermal performance.

  3. How is SS8P2CLHM3_A/H typically used in technical solutions?

    • SS8P2CLHM3_A/H is commonly used in voltage regulation, power supply units, and motor control applications.

  4. What are the benefits of using SS8P2CLHM3_A/H in technical solutions?

    • Using SS8P2CLHM3_A/H can lead to improved energy efficiency, reduced heat generation, and enhanced overall system reliability.

  5. Are there any specific design considerations when integrating SS8P2CLHM3_A/H into a technical solution?

    • Designers should consider thermal management, input/output voltage requirements, and load current characteristics when integrating SS8P2CLHM3_A/H.

  6. What are the typical operating conditions for SS8P2CLHM3_A/H?

    • SS8P2CLHM3_A/H operates within a specified temperature range and voltage limits, which should be carefully adhered to for optimal performance.

  7. Can SS8P2CLHM3_A/H be used in automotive or industrial applications?

    • Yes, SS8P2CLHM3_A/H is suitable for use in automotive and industrial applications due to its rugged design and high reliability.

  8. Are there any recommended companion components or circuitry for SS8P2CLHM3_A/H?

    • It is advisable to use appropriate input/output capacitors, inductors, and control circuitry to maximize the performance of SS8P2CLHM3_A/H.

  9. What are the potential challenges or limitations when using SS8P2CLHM3_A/H in technical solutions?

    • Challenges may include EMI/EMC considerations, transient response optimization, and ensuring proper PCB layout for thermal dissipation.

  10. Where can I find detailed technical documentation and support for SS8P2CLHM3_A/H?

    • Detailed technical documentation, application notes, and support for SS8P2CLHM3_A/H can be obtained from the manufacturer's website or authorized distributors.