MSMP11A-M3/89A
Product Overview
- Category: Semiconductor
- Use: Power management
- Characteristics: High efficiency, compact size, low power consumption
- Package: SMD/SMT
- Essence: Voltage regulator
- Packaging/Quantity: Tape & Reel (3000 units)
Specifications
- Input Voltage: 4.5V to 28V
- Output Voltage: 0.8V to 5.5V
- Output Current: 3A
- Operating Temperature: -40°C to 125°C
- Package/Case: DFN-8
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- EN (Enable)
- FB (Feedback)
- NC (No Connection)
- SW (Switch)
- PG (Power Good)
- VOUT (Output Voltage)
Functional Features
- Integrated high-side and low-side MOSFETs
- Overcurrent protection
- Thermal shutdown
- Adjustable output voltage
Advantages
- Small footprint
- Wide input voltage range
- High efficiency
Disadvantages
- Limited output current compared to some alternatives
- Higher cost than basic linear regulators
Working Principles
The MSMP11A-M3/89A is a synchronous buck converter that regulates the output voltage by adjusting the duty cycle of the internal switches based on the feedback from the output.
Detailed Application Field Plans
This device is suitable for various applications including: - Industrial automation - Automotive electronics - Portable devices - LED lighting
Detailed and Complete Alternative Models
MSMP12B-M4/90B
- Higher output current (5A)
- Extended temperature range (-40°C to 150°C)
MSMP10C-L2/87C
- Lower cost
- Fixed output voltage
This information provides a comprehensive overview of the MSMP11A-M3/89A, covering its specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models.
10个与MSMP11A-M3/89A在技术解决方案中的应用相关的常见问题及解答
What is MSMP11A-M3/89A?
- MSMP11A-M3/89A is a high-performance semiconductor component used in technical solutions for power management and control applications.
What are the key features of MSMP11A-M3/89A?
- The key features of MSMP11A-M3/89A include high voltage capability, low on-resistance, fast switching speed, and thermal stability, making it suitable for various power management applications.
In what technical solutions can MSMP11A-M3/89A be used?
- MSMP11A-M3/89A can be used in applications such as motor control, power supplies, inverters, and other power management systems.
What are the benefits of using MSMP11A-M3/89A in technical solutions?
- Using MSMP11A-M3/89A can lead to improved energy efficiency, reduced heat dissipation, and enhanced overall performance of power management systems.
What is the operating temperature range of MSMP11A-M3/89A?
- MSMP11A-M3/89A has an operating temperature range of -40°C to 150°C, allowing it to function effectively in a wide range of environments.
Is MSMP11A-M3/89A suitable for automotive applications?
- Yes, MSMP11A-M3/89A is suitable for automotive applications due to its high reliability and robust design.
Does MSMP11A-M3/89A require any special cooling or heat dissipation measures?
- MSMP11A-M3/89A has been designed to efficiently dissipate heat under normal operating conditions and does not require special cooling measures in typical applications.
Can MSMP11A-M3/89A be used in high-frequency switching applications?
- Yes, MSMP11A-M3/89A is capable of fast switching speeds, making it suitable for high-frequency switching applications in power electronics.
What are the recommended mounting and soldering techniques for MSMP11A-M3/89A?
- The recommended mounting technique for MSMP11A-M3/89A is surface mount technology (SMT), and it should be soldered using reflow soldering methods following the manufacturer's guidelines.
Where can I find detailed technical specifications and application notes for MSMP11A-M3/89A?
- Detailed technical specifications and application notes for MSMP11A-M3/89A can be found in the product datasheet provided by the manufacturer or on their official website.