TIBPAL16L8-10CFN

Product Overview

Category

TIBPAL16L8-10CFN belongs to the category of programmable logic devices (PLDs).

Use

This device is commonly used in digital circuit design and implementation.

Characteristics

• Programmable: The TIBPAL16L8-10CFN can be programmed to perform specific logic functions.
• High Speed: It operates at a fast clock speed, allowing for efficient processing of digital signals.
• Low Power Consumption: The device is designed to minimize power consumption, making it suitable for portable electronic devices.
• Versatile: It can be used in a wide range of applications due to its programmability.

Package

The TIBPAL16L8-10CFN comes in a ceramic flat-pack package.

Essence

The essence of this product lies in its ability to provide flexible and customizable logic functions for digital circuits.

Packaging/Quantity

The TIBPAL16L8-10CFN is typically packaged in reels or tubes, with a quantity of 25 units per package.

Specifications

• Logic Family: PAL
• Number of Inputs: 8
• Number of Outputs: 8
• Operating Voltage: 5V
• Maximum Frequency: 10MHz
• Programming Technology: Fuse-link
• Operating Temperature Range: -40°C to +85°C

Detailed Pin Configuration

The TIBPAL16L8-10CFN has a total of 20 pins. The pin configuration is as follows:

1. GND (Ground)
2. I/O0 (Input/Output 0)
3. I/O1 (Input/Output 1)
4. I/O2 (Input/Output 2)
5. I/O3 (Input/Output 3)
6. I/O4 (Input/Output 4)
7. I/O5 (Input/Output 5)
8. I/O6 (Input/Output 6)
9. I/O7 (Input/Output 7)

10. VCC (Power Supply)

11. /OE (Output Enable)

12. /CE (Chip Enable)
13. A0 (Address 0)
14. A1 (Address 1)
15. A2 (Address 2)
16. A3 (Address 3)
17. A4 (Address 4)
18. A5 (Address 5)
19. /PGM (Program Mode)
20. /VPP (Programming Voltage)

Functional Features

The TIBPAL16L8-10CFN offers the following functional features:

• Programmable Logic: The device can be programmed to implement various logic functions, such as AND, OR, XOR, etc.
• Output Enable Control: The /OE pin allows for enabling or disabling the outputs of the device.
• Chip Enable Control: The /CE pin enables or disables the operation of the device.
• Address Inputs: The A0-A5 pins are used to select different memory locations for programming.
• Programming Mode: The /PGM pin activates the programming mode of the device.
• Programming Voltage: The /VPP pin provides the necessary programming voltage.

Advantages and Disadvantages

Advantages

• Flexibility: The programmability of the TIBPAL16L8-10CFN allows for customization according to specific requirements.
• High Speed: The device operates at a fast clock speed, ensuring efficient processing of digital signals.
• Low Power Consumption: It is designed to minimize power consumption, making it suitable for battery-powered devices.

Disadvantages

• Limited Complexity: The device has a limited number of inputs and outputs, which may restrict its application in complex circuits.
• One-time Programmability: Once programmed, the device cannot be reprogrammed, requiring a new device for any changes in logic functions.

Working Principles

The TIBPAL16L8-10CFN utilizes fuse-link technology to implement programmable logic. The programming process involves blowing fuses to create desired logic functions. The programmed configuration is stored in non-volatile memory, allowing the device to retain its programmed state even after power is removed.

Detailed Application Field Plans

The TIBPAL16L8-10CFN finds applications in various fields, including:

1. Digital Circuit Design: It can be used to implement custom logic functions in digital circuits.
2. Embedded Systems: The device can be utilized in embedded systems for control and signal processing.
3. Communication Systems: It can be employed in communication systems for protocol handling and data manipulation.
4. Industrial Automation: The TIBPAL16L8-10CFN can be integrated into industrial automation systems for control and monitoring purposes.

Detailed and Complete Alternative Models

1. TIBPAL16R8-25CN: Similar to TIBPAL16L8-10CFN, but with different speed