The SN74LVCH16374AGQLR has a total of 56 pins, which are assigned specific functions. Here is the detailed pin configuration:
Sure! Here are 10 common questions and answers related to the application of SN74LVCH16374AGQLR:
Q: What is SN74LVCH16374AGQLR? A: SN74LVCH16374AGQLR is a 16-bit D-type flip-flop with 3-state outputs, designed for low-voltage (LV) and high-speed applications.
Q: What is the operating voltage range of SN74LVCH16374AGQLR? A: SN74LVCH16374AGQLR operates within a voltage range of 1.65V to 3.6V.
Q: What is the maximum data transfer rate supported by SN74LVCH16374AGQLR? A: SN74LVCH16374AGQLR supports a maximum data transfer rate of 400 Mbps.
Q: Can SN74LVCH16374AGQLR be used in both input and output applications? A: Yes, SN74LVCH16374AGQLR can be used as both an input and output device.
Q: How many flip-flops are there in SN74LVCH16374AGQLR? A: SN74LVCH16374AGQLR consists of 16 individual D-type flip-flops.
Q: What is the purpose of the 3-state outputs in SN74LVCH16374AGQLR? A: The 3-state outputs allow multiple devices to share a common bus without interfering with each other.
Q: Can SN74LVCH16374AGQLR handle asynchronous inputs? A: No, SN74LVCH16374AGQLR does not support asynchronous inputs. It requires synchronous clocking.
Q: What is the typical propagation delay of SN74LVCH16374AGQLR? A: The typical propagation delay of SN74LVCH16374AGQLR is around 3.5 ns.
Q: Can SN74LVCH16374AGQLR be used in high-speed applications? A: Yes, SN74LVCH16374AGQLR is designed for high-speed applications and can operate at frequencies up to several hundred megahertz.
Q: What are some common applications of SN74LVCH16374AGQLR? A: SN74LVCH16374AGQLR is commonly used in data storage systems, address decoding, bus interfacing, and other digital logic applications.
Please note that these answers are general and may vary depending on specific use cases and requirements.