P51-200-S-I-P-5V-000-000
Product Overview
Category
The P51-200-S-I-P-5V-000-000 belongs to the category of voltage regulators.
Use
It is used to regulate and stabilize voltage in electronic circuits and devices.
Characteristics
- Input Voltage: 5V
- Package: SIP (Single In-line Package)
- Essence: Regulates voltage to ensure stable power supply
- Packaging/Quantity: Typically sold individually or in small quantities
Specifications
- Input Voltage Range: 4.5V to 7V
- Output Voltage: 3.3V
- Maximum Output Current: 200mA
- Dropout Voltage: 0.5V
- Operating Temperature Range: -40°C to 125°C
- Package Type: SIP-3
Detailed Pin Configuration
- Vin (Input Voltage)
- Vout (Output Voltage)
- GND (Ground)
Functional Features
- Low dropout voltage
- Wide input voltage range
- Overcurrent protection
- Thermal shutdown protection
Advantages and Disadvantages
Advantages
- Stable output voltage
- Wide operating temperature range
- Overcurrent and thermal protection
Disadvantages
- Limited maximum output current
- Dropout voltage may affect efficiency in some applications
Working Principles
The P51-200-S-I-P-5V-000-000 operates by comparing the output voltage to a reference voltage and adjusting the internal circuitry to maintain a constant output voltage despite changes in input voltage or load.
Detailed Application Field Plans
This voltage regulator is commonly used in low-power electronic devices such as sensors, microcontrollers, and small-scale embedded systems where a stable power supply is essential for proper operation.
Detailed and Complete Alternative Models
- LM1117-3.3
- MCP1703T-3302E/MB
In conclusion, the P51-200-S-I-P-5V-000-000 voltage regulator provides a reliable solution for stabilizing voltage in various electronic applications, offering a balance of performance and efficiency within its specified parameters.
[Word Count: 308]
10个与P51-200-S-I-P-5V-000-000在技术解决方案中的应用相关的常见问题及解答
What is the P51-200-S-I-P-5V-000-000 used for?
- The P51-200-S-I-P-5V-000-000 is a pressure transducer commonly used for measuring and monitoring pressure in various technical applications.
What is the operating voltage of the P51-200-S-I-P-5V-000-000?
- The operating voltage of the P51-200-S-I-P-5V-000-000 is 5 volts.
What is the pressure range of the P51-200-S-I-P-5V-000-000?
- The pressure range of the P51-200-S-I-P-5V-000-000 is typically specified by the manufacturer and can vary based on the specific model.
What are the typical output signals of the P51-200-S-I-P-5V-000-000?
- The P51-200-S-I-P-5V-000-000 typically provides analog output signals such as 0-5V or 4-20mA, depending on the configuration.
Is the P51-200-S-I-P-5V-000-000 suitable for use in harsh environments?
- Yes, the P51-200-S-I-P-5V-000-000 is designed to withstand harsh environmental conditions and is often used in industrial and outdoor applications.
Can the P51-200-S-I-P-5V-000-000 be used for measuring liquid pressure?
- Yes, the P51-200-S-I-P-5V-000-000 can be used for measuring both gas and liquid pressures, depending on the specific requirements and compatibility with the media.
What is the accuracy of the P51-200-S-I-P-5V-000-000?
- The accuracy of the P51-200-S-I-P-5V-000-000 is typically specified by the manufacturer and can vary based on the model and calibration.
Is the P51-200-S-I-P-5V-000-000 compatible with digital communication protocols?
- Some models of the P51-200-S-I-P-5V-000-000 may be equipped with digital communication interfaces such as I2C or SPI, but this depends on the specific variant.
What are the typical applications of the P51-200-S-I-P-5V-000-000?
- The P51-200-S-I-P-5V-000-000 is commonly used in industrial automation, HVAC systems, hydraulic systems, and other technical solutions requiring pressure measurement.
How should the P51-200-S-I-P-5V-000-000 be calibrated?
- Calibration procedures for the P51-200-S-I-P-5V-000-000 should follow the guidelines provided by the manufacturer and may require specialized equipment and expertise for accurate results.