Sharp Microelectronics
图片可能具有代表性。
产品详情请参阅规格.
GA1A2S100SS
查看详情 数据表

GA1A2S100SS

Product Overview

  • Category: Light Sensor
  • Use: Detecting ambient light levels
  • Characteristics: High sensitivity, low dark current, small package size
  • Package: Surface mount package
  • Essence: Provides accurate light detection for various applications
  • Packaging/Quantity: Typically available in reels of 3000 units

Specifications

  • Operating Voltage: 2.7V to 6V
  • Output Type: Analog voltage output
  • Spectral Response Range: 430nm to 700nm
  • Operating Temperature Range: -40°C to 85°C
  • Dimensions: 4.8mm x 2.5mm x 3.2mm

Detailed Pin Configuration

The GA1A2S100SS has three pins: 1. VCC (Power supply) 2. GND (Ground) 3. VOUT (Analog voltage output)

Functional Features

  • High sensitivity to light
  • Low dark current
  • Small form factor for easy integration
  • Wide spectral response range

Advantages and Disadvantages

Advantages

  • Accurate light detection
  • Suitable for various lighting conditions
  • Small package size for space-constrained designs

Disadvantages

  • Limited operating temperature range
  • Analog output may require additional circuitry for digital interfacing

Working Principles

The GA1A2S100SS operates based on the principle of photoconductivity. When exposed to light, the sensor's resistance decreases, leading to a change in the output voltage. This change is proportional to the intensity of the incident light.

Detailed Application Field Plans

The GA1A2S100SS is widely used in: - Ambient light sensing in display devices - Automatic brightness adjustment in consumer electronics - Daylight harvesting systems in smart buildings - Industrial automation for light-dependent processes

Detailed and Complete Alternative Models

Some alternative models to GA1A2S100SS include: - GA1A1S202WP: Higher sensitivity variant - GA2A2S202WP: Dual-channel light sensor for color sensing applications - BH1750: Digital light sensor with I2C interface

In conclusion, the GA1A2S100SS light sensor offers high sensitivity and accurate light detection, making it suitable for various applications in consumer electronics, industrial automation, and smart building systems.

[Word Count: 298]

10个与GA1A2S100SS在技术解决方案中的应用相关的常见问题及解答

  1. What is GA1A2S100SS?

    • GA1A2S100SS is a compact and low-cost ambient light sensor that provides analog output signals proportional to the amount of light detected.

  2. How does GA1A2S100SS work?

    • The sensor utilizes a photodiode and an amplifier to convert light intensity into electrical signals, which can be used to determine the ambient light level.

  3. What are the typical applications of GA1A2S100SS?

    • It is commonly used in applications such as automatic brightness control for displays, street lighting control, and daylight harvesting systems.

  4. What is the operating voltage range of GA1A2S100SS?

    • The sensor typically operates within a voltage range of 2.7V to 6V.

  5. What is the spectral response of GA1A2S100SS?

    • The sensor has a peak sensitivity at 540nm, making it suitable for detecting visible light.

  6. Can GA1A2S100SS be used in outdoor environments?

    • Yes, it can be used outdoors, but proper protection from environmental factors such as moisture and direct sunlight may be required.

  7. What is the resolution of GA1A2S100SS?

    • The sensor has a high-resolution output that allows for precise measurement of light intensity.

  8. Is calibration necessary for GA1A2S100SS?

    • Calibration may be required to ensure accurate readings, especially in critical applications.

  9. What is the response time of GA1A2S100SS?

    • The sensor has a fast response time, typically in the range of milliseconds, allowing for real-time adjustments based on light levels.

  10. Can GA1A2S100SS be integrated with microcontrollers?

    • Yes, it can be easily interfaced with microcontrollers through its analog output, making it suitable for various technical solutions requiring light sensing capabilities.