ON Semiconductor
图片可能具有代表性。
产品详情请参阅规格.
MUN2113T1G
查看详情 数据表

MUN2113T1G

Introduction

The MUN2113T1G is a transistor belonging to the category of small signal transistors. It is commonly used in electronic circuits for amplification and switching purposes due to its high frequency and low power characteristics.

Basic Information Overview

  • Category: Small Signal Transistor
  • Use: Amplification and Switching
  • Characteristics: High Frequency, Low Power
  • Package: SOT-23
  • Essence: NPN Bipolar Junction Transistor
  • Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Voltage - Collector Emitter Breakdown (Max): 50V
  • Current - Collector (Ic) (Max): 100mA
  • Power - Max: 225mW
  • DC Current Gain (hFE) (Min) @ Ic, Vce: 100 @ 2mA, 5V
  • Transition Frequency: 250MHz

Detailed Pin Configuration

The MUN2113T1G has three pins: 1. Emitter (E) 2. Base (B) 3. Collector (C)

Functional Features

  • High Frequency Operation
  • Low Power Consumption
  • Small Package Size

Advantages

  • Suitable for High-Frequency Applications
  • Compact SOT-23 Package
  • Low Cost

Disadvantages

  • Limited Maximum Voltage and Current Ratings
  • Relatively Low Power Handling Capacity

Working Principles

The MUN2113T1G operates based on the principles of bipolar junction transistors, where the flow of current between the collector and emitter is controlled by the base current.

Detailed Application Field Plans

The MUN2113T1G is widely used in: - RF Amplifiers - Oscillators - Switching Circuits - Low Power Audio Amplifiers

Detailed and Complete Alternative Models

  1. 2N3904: Similar NPN transistor with higher voltage and current ratings.
  2. BC547: General-purpose NPN transistor suitable for low-power applications.
  3. MMBT3904: Surface-mount equivalent with similar specifications.

In conclusion, the MUN2113T1G is a versatile small signal transistor suitable for various electronic applications, especially those requiring high frequency and low power operation.

Word Count: 298

10个与MUN2113T1G在技术解决方案中的应用相关的常见问题及解答

  1. What is MUN2113T1G?

    • MUN2113T1G is a high-voltage NPN transistor used in various technical solutions for amplification and switching applications.

  2. What are the typical applications of MUN2113T1G?

    • MUN2113T1G is commonly used in power management, voltage regulation, motor control, and other high-voltage applications.

  3. What is the maximum voltage and current rating for MUN2113T1G?

    • The maximum voltage rating for MUN2113T1G is typically around 50V, and the maximum continuous collector current is around 500mA.

  4. How do I properly bias MUN2113T1G for my application?

    • Proper biasing involves setting the base-emitter voltage and collector current to ensure the transistor operates within its safe operating area. This can be achieved using appropriate resistors and voltage sources.

  5. Can MUN2113T1G be used for audio amplification?

    • Yes, MUN2113T1G can be used for small-signal audio amplification when properly biased and configured in an appropriate circuit.

  6. What are the thermal considerations for MUN2113T1G in high-power applications?

    • In high-power applications, it's important to consider the thermal dissipation of the transistor to prevent overheating. Proper heat sinking and thermal management techniques should be employed.

  7. Are there any common failure modes for MUN2113T1G?

    • Common failure modes include thermal runaway due to inadequate heat dissipation, overvoltage stress, and excessive current leading to breakdown.

  8. Can MUN2113T1G be used in switch-mode power supplies?

    • Yes, MUN2113T1G can be used in switch-mode power supplies for high-voltage switching applications with appropriate drive circuitry.

  9. What are the key parameters to consider when selecting MUN2113T1G for a specific application?

    • Key parameters include voltage and current ratings, gain, frequency response, and power dissipation capabilities.

  10. Where can I find detailed application notes and reference designs for using MUN2113T1G in technical solutions?

    • Detailed application notes and reference designs can often be found in the manufacturer's datasheet, application guides, or online technical resources related to semiconductor devices.