ON Semiconductor
图片可能具有代表性。
产品详情请参阅规格.
MPSA92ZL1G
查看详情 数据表

MPSA92ZL1G

Introduction

The MPSA92ZL1G is a semiconductor device belonging to the category of small signal transistors. This component is commonly used in electronic circuits for amplification and switching applications due to its specific characteristics and performance.

Basic Information Overview

  • Category: Small Signal Transistor
  • Use: Amplification and Switching Applications
  • Characteristics: High Voltage, Low Power, NPN Bipolar Junction Transistor
  • Package: TO-92
  • Essence: The MPSA92ZL1G is designed to provide high voltage amplification and low power consumption in various electronic circuits.
  • Packaging/Quantity: Available in reels or tubes with varying quantities.

Specifications

  • Maximum Collector-Emitter Voltage (VCEO): 300V
  • Maximum Collector-Base Voltage (VCBO): 300V
  • Maximum Emitter-Base Voltage (VEBO): 5V
  • Continuous Collector Current (IC): 200mA
  • Power Dissipation (PD): 625mW
  • Transition Frequency (fT): 100MHz

Detailed Pin Configuration

The MPSA92ZL1G transistor has three pins: 1. Collector (C) 2. Base (B) 3. Emitter (E)

Functional Features

  • High Voltage Capability
  • Low Power Consumption
  • Fast Switching Speed
  • Wide Frequency Range

Advantages and Disadvantages

Advantages

  • Suitable for high voltage applications
  • Low leakage current
  • Compact TO-92 package
  • Wide operating temperature range

Disadvantages

  • Relatively low current handling capability compared to power transistors
  • Limited power dissipation capacity

Working Principles

The MPSA92ZL1G operates based on the principles of bipolar junction transistors, where the flow of current between the collector and emitter is controlled by the base current. It amplifies or switches electronic signals according to the input conditions.

Detailed Application Field Plans

The MPSA92ZL1G is widely used in the following applications: - Audio Amplifiers - Signal Processing Circuits - Voltage Regulators - Oscillator Circuits - Switching Circuits

Detailed and Complete Alternative Models

Some alternative models to the MPSA92ZL1G include: - BC557 - 2N3904 - BC547 - 2N2222

In conclusion, the MPSA92ZL1G small signal transistor offers high voltage capability and low power consumption, making it suitable for various amplification and switching applications in electronic circuits.

[Word Count: 324]

10个与MPSA92ZL1G在技术解决方案中的应用相关的常见问题及解答

  1. What is the MPSA92ZL1G transistor used for?

    • The MPSA92ZL1G is a high voltage PNP bipolar junction transistor (BJT) commonly used in audio amplification, switching, and linear applications.

  2. What are the key specifications of the MPSA92ZL1G?

    • The MPSA92ZL1G has a maximum collector-emitter voltage of 300V, a continuous collector current of 500mA, and a power dissipation of 625mW.

  3. How can I use the MPSA92ZL1G in an audio amplifier circuit?

    • The MPSA92ZL1G can be used as a preamplifier or driver stage in audio amplifier circuits due to its high voltage capability and low noise characteristics.

  4. Can the MPSA92ZL1G be used for switching applications?

    • Yes, the MPSA92ZL1G can be used for low-power switching applications such as relay drivers and small motor control due to its moderate current handling capability.

  5. What are the typical operating conditions for the MPSA92ZL1G?

    • The MPSA92ZL1G is typically operated at a collector current of 100mA to 200mA and a collector-emitter voltage of 5V to 50V.

  6. Is the MPSA92ZL1G suitable for high-frequency applications?

    • No, the MPSA92ZL1G is not designed for high-frequency applications due to its relatively low transition frequency.

  7. Can the MPSA92ZL1G be used in temperature-sensitive environments?

    • The MPSA92ZL1G has a maximum operating temperature of 150°C, so it should be used with caution in high-temperature environments.

  8. What are some common alternatives to the MPSA92ZL1G?

    • Common alternatives to the MPSA92ZL1G include the MPSA42 and MPSA92 transistors, which have similar characteristics and pin configurations.

  9. Are there any special considerations when designing with the MPSA92ZL1G?

    • Designers should pay attention to the maximum voltage and current ratings, as well as the thermal considerations when using the MPSA92ZL1G in their circuits.

  10. Where can I find detailed application notes for using the MPSA92ZL1G in technical solutions?

    • Detailed application notes for the MPSA92ZL1G can be found in the manufacturer's datasheet, as well as in various electronics engineering resources and forums.