ON Semiconductor
图片可能具有代表性。
产品详情请参阅规格.
KST4401MTF
查看详情 数据表

KST4401MTF

Product Overview

  • Belongs to: Electronic Components
  • Category: Transistor
  • Use: Amplification and Switching
  • Characteristics: Small size, high gain, low noise
  • Package: TO-92
  • Essence: NPN Silicon Epitaxial Planar Transistor
  • Packaging/Quantity: Bulk packaging, 100 pieces per pack

Specifications

  • Type: NPN
  • Maximum Collector-Emitter Voltage (Vce): 40V
  • Maximum Collector Current (Ic): 600mA
  • DC Current Gain (hfe): 100 - 300
  • Power Dissipation (Pd): 625mW
  • Operating Temperature Range: -55°C to +150°C

Detailed Pin Configuration

  • Pin 1 (Emitter): Connected to the Emitter of the transistor
  • Pin 2 (Base): Connected to the Base of the transistor
  • Pin 3 (Collector): Connected to the Collector of the transistor

Functional Features

  • High voltage capability
  • Low saturation voltage
  • Complementary to KST5401MTF

Advantages

  • Small package size
  • High current gain
  • Wide operating temperature range

Disadvantages

  • Limited power dissipation
  • Moderate frequency response

Working Principles

The KST4401MTF operates as a typical NPN transistor, where the flow of current is controlled by the base terminal. When a small current is applied to the base, it allows a larger current to flow from the collector to the emitter.

Detailed Application Field Plans

  • Audio amplification circuits
  • Switching circuits
  • Signal amplification in electronic devices

Detailed and Complete Alternative Models

  • KST4401M
  • KST4401G
  • KST4401D

This comprehensive entry provides detailed information about the KST4401MTF, covering its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

10个与KST4401MTF在技术解决方案中的应用相关的常见问题及解答

  1. What is KST4401MTF?

    • KST4401MTF is a type of temperature sensor used in various technical solutions to measure and control temperature.

  2. How does KST4401MTF work?

    • KST4401MTF operates by detecting changes in temperature and sending signals to the control system to adjust the temperature as needed.

  3. What is the temperature range for KST4401MTF?

    • The temperature range for KST4401MTF is typically between -50°C to 150°C, making it suitable for a wide range of applications.

  4. What are the common applications of KST4401MTF?

    • KST4401MTF is commonly used in HVAC systems, refrigeration units, industrial ovens, and other temperature-controlled equipment.

  5. Is KST4401MTF compatible with digital control systems?

    • Yes, KST4401MTF can be integrated with digital control systems for precise temperature management.

  6. Can KST4401MTF be used in outdoor environments?

    • KST4401MTF is designed to withstand outdoor conditions and can be used in outdoor applications with proper protection from moisture and extreme temperatures.

  7. What is the accuracy of KST4401MTF?

    • KST4401MTF typically has an accuracy of ±1°C, ensuring reliable temperature measurements.

  8. Does KST4401MTF require calibration?

    • Periodic calibration may be necessary to maintain the accuracy of KST4401MTF, especially in critical applications.

  9. Are there any special installation requirements for KST4401MTF?

    • KST4401MTF should be installed in a location that accurately represents the temperature of the controlled environment and away from sources of heat or cold drafts.

  10. Where can I purchase KST4401MTF?

    • KST4401MTF can be purchased from authorized distributors or directly from the manufacturer.