MPX2050GSX
Introduction
The MPX2050GSX is a pressure sensor belonging to the category of integrated silicon pressure sensors. This sensor is widely used in various applications due to its unique characteristics and reliable performance.
Basic Information Overview
- Category: Integrated Silicon Pressure Sensor
- Use: Measures absolute pressure
- Characteristics: Small size, high reliability, low cost
- Package: Surface mount
- Essence: Accurate pressure measurement
- Packaging/Quantity: Tape and reel packaging, quantity varies based on supplier
Specifications
- Pressure Range: 0 to 50 psi
- Supply Voltage: 4.75 to 5.25 V
- Output Type: Analog
- Operating Temperature Range: -40°C to 125°C
- Accuracy: ±1.5% Full Scale
Detailed Pin Configuration
The MPX2050GSX features a standard pin configuration with 6 pins: 1. Vout (Analog Output) 2. Vss (Ground) 3. Vdd (Supply Voltage) 4. N/C (No Connection) 5. N/C (No Connection) 6. N/C (No Connection)
Functional Features
- Accurate pressure sensing
- Low power consumption
- High sensitivity
- Overvoltage protection
Advantages and Disadvantages
Advantages
- Small form factor
- Wide operating temperature range
- Reliable and stable performance
- Cost-effective solution for pressure measurement
Disadvantages
- Limited pressure range
- Analog output requires external signal conditioning
Working Principles
The MPX2050GSX operates based on the principle of piezoresistive sensing. When pressure is applied, the internal resistors change their resistance, resulting in a corresponding change in the output voltage.
Detailed Application Field Plans
The MPX2050GSX finds extensive use in various applications, including: - Automotive: Tire pressure monitoring systems - Industrial: Process control and monitoring - Medical: Respiratory equipment - Consumer Electronics: Smart appliances
Detailed and Complete Alternative Models
- MPX5700AP: Higher pressure range (0 to 700 kPa)
- MPXV5010G: Lower pressure range (0 to 10 kPa)
- MPX12GP: Differential pressure sensor
In conclusion, the MPX2050GSX is a versatile pressure sensor with a wide range of applications, offering accurate and reliable pressure measurement capabilities.
(Word count: 366)
10个与MPX2050GSX在技术解决方案中的应用相关的常见问题及解答
What is the MPX2050GSX pressure sensor used for?
- The MPX2050GSX pressure sensor is commonly used to measure and monitor air or gas pressure in various technical applications.
What is the operating voltage range of the MPX2050GSX?
- The operating voltage range of the MPX2050GSX is typically 4.75V to 5.25V.
Can the MPX2050GSX be used for liquid pressure measurement?
- No, the MPX2050GSX is specifically designed for air and gas pressure measurement and should not be used for liquid pressure.
What is the output signal type of the MPX2050GSX?
- The MPX2050GSX provides an analog output signal, typically a ratiometric voltage proportional to the measured pressure.
What is the pressure range that the MPX2050GSX can measure?
- The MPX2050GSX is capable of measuring pressure within a range of 0 to 50 psi (pounds per square inch).
Is the MPX2050GSX suitable for high-temperature environments?
- The MPX2050GSX has a specified operating temperature range of -40°C to 125°C, making it suitable for a wide range of environments, including some high-temperature applications.
What are the typical applications of the MPX2050GSX?
- Typical applications of the MPX2050GSX include automotive systems, industrial controls, HVAC systems, and medical equipment.
Does the MPX2050GSX require calibration?
- Yes, like most pressure sensors, the MPX2050GSX may require periodic calibration to ensure accurate and reliable measurements.
Can the MPX2050GSX be directly connected to a microcontroller?
- Yes, the MPX2050GSX can be interfaced with a microcontroller through its analog output, allowing for easy integration into electronic systems.
What is the response time of the MPX2050GSX?
- The response time of the MPX2050GSX is typically fast, allowing for real-time monitoring and control of pressure changes in the system.