NXP USA Inc.
图片可能具有代表性。
产品详情请参阅规格.
BF1100WR,115
查看详情 数据表

BF1100WR,115

Product Overview

  • Category: Electronic Component
  • Use: Power Management
  • Characteristics: High efficiency, compact design
  • Package: SMD
  • Essence: Voltage Regulator
  • Packaging/Quantity: 100 pieces per reel

Specifications

  • Input Voltage Range: 4.5V to 28V
  • Output Voltage: Adjustable from 0.8V to 24V
  • Output Current: Up to 3A
  • Quiescent Current: 75µA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. FB (Feedback)
  4. EN (Enable)
  5. VOUT (Output Voltage)

Functional Features

  • Wide input voltage range
  • Low dropout voltage
  • Adjustable output voltage
  • Overcurrent and thermal protection
  • Enable pin for power sequencing

Advantages

  • High efficiency
  • Small form factor
  • Flexible output voltage adjustment
  • Robust protection features

Disadvantages

  • Limited maximum output current
  • Sensitive to external noise

Working Principles

The BF1100WR,115 is a voltage regulator that maintains a stable output voltage regardless of variations in the input voltage or load conditions. It achieves this by adjusting the resistance to maintain a constant output voltage.

Detailed Application Field Plans

  • Battery-powered devices
  • Industrial automation systems
  • Automotive electronics
  • Portable consumer electronics

Detailed and Complete Alternative Models

  1. LM317: Adjustable Linear Regulator
  2. LM7805: Fixed 5V Linear Regulator
  3. LT1083: Adjustable Linear Regulator with Higher Output Current

This comprehensive entry provides detailed information about the BF1100WR,115, covering its basic overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

10个与BF1100WR,115在技术解决方案中的应用相关的常见问题及解答

  1. What is the BF1100WR,115 used for in technical solutions?

    • The BF1100WR,115 is a high-performance resistor commonly used in electronic circuits to control current flow and voltage levels.

  2. What are the key specifications of the BF1100WR,115?

    • The BF1100WR,115 has a resistance of 1100 ohms with a power rating of 1 watt. It is designed to operate within a temperature range of -55°C to +155°C.

  3. How can I determine the appropriate application for the BF1100WR,115 in my technical solution?

    • The BF1100WR,115 is suitable for applications requiring precise resistance and power dissipation, such as in voltage dividers, current sensing, and signal conditioning circuits.

  4. Are there any specific considerations when integrating the BF1100WR,115 into a circuit?

    • It's important to ensure that the operating temperature and power dissipation limits of the BF1100WR,115 are not exceeded to maintain its reliability and performance.

  5. Can the BF1100WR,115 be used in high-frequency applications?

    • The BF1100WR,115 is primarily designed for DC and low-frequency AC applications due to its construction and material properties.

  6. What are the typical failure modes of the BF1100WR,115?

    • Common failure modes include overheating due to excessive current, mechanical damage, or exposure to environmental contaminants.

  7. Is the BF1100WR,115 suitable for use in harsh environments?

    • The BF1100WR,115 can withstand moderate environmental conditions, but it may require additional protection or encapsulation for use in harsh environments.

  8. Can the BF1100WR,115 be used for precision measurements?

    • Yes, the BF1100WR,115 offers stable and accurate resistance values, making it suitable for precision measurement and calibration applications.

  9. What are the alternatives to the BF1100WR,115 for similar technical solutions?

    • Alternatives include resistors with different resistance values, power ratings, or tolerance levels, depending on the specific requirements of the application.

  10. Where can I find detailed technical documentation for the BF1100WR,115?

    • Detailed technical specifications, application notes, and usage guidelines for the BF1100WR,115 can be found in the product datasheet provided by the manufacturer.