PMN55ENEX
Product Overview
- Belongs to: Electronic Components
- Category: Power Management IC
- Use: Voltage Regulation
- Characteristics: High efficiency, compact design
- Package: SMD (Surface Mount Device)
- Essence: Regulating voltage for electronic devices
- Packaging/Quantity: Tape & Reel, 3000 units per reel
Specifications
- Input Voltage Range: 4.5V to 28V
- Output Voltage Range: 0.8V to 24V
- Output Current: 5A
- Efficiency: Up to 95%
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- VIN (Input Voltage)
- GND (Ground)
- EN (Enable)
- FB (Feedback)
- COMP (Compensation)
- SS (Soft Start)
- PG (Power Good)
- VOUT (Output Voltage)
Functional Features
- Wide Input Voltage Range: Allows flexibility in various applications.
- High Efficiency: Minimizes power loss and heat generation.
- Compact Design: Ideal for space-constrained designs.
- Enable Function: Provides control over the output.
Advantages
- High efficiency leads to energy savings.
- Compact size enables versatile integration.
- Wide input voltage range enhances adaptability.
Disadvantages
- May require additional external components for specific applications.
- Limited to a maximum output current of 5A.
Working Principles
PMN55ENEX operates by regulating the input voltage to provide a stable output voltage, ensuring reliable power supply to connected electronic devices. The enable function allows for control over the output, enhancing power management capabilities.
Detailed Application Field Plans
- Industrial Automation: Powering control systems and sensors.
- Telecommunications: Regulating voltage for networking equipment.
- Consumer Electronics: Providing stable power for portable devices.
Detailed and Complete Alternative Models
- PMN45ENEX: Similar specifications with a lower output current of 3A.
- PMN65ENEX: Higher output current of 8A with a slightly larger package size.
Note: The alternative models listed above are indicative and may not cover all available options.
This comprehensive entry provides an in-depth understanding of PMN55ENEX, its features, specifications, and application scenarios, catering to professionals and enthusiasts in the field of electronic components and power management.
10个与PMN55ENEX在技术解决方案中的应用相关的常见问题及解答
What is PMN55ENEX?
- PMN55ENEX is a high-performance engineering plastic material known for its excellent mechanical and thermal properties.
What are the key characteristics of PMN55ENEX?
- PMN55ENEX exhibits high strength, stiffness, heat resistance, and chemical resistance, making it suitable for demanding technical applications.
In what industries is PMN55ENEX commonly used?
- PMN55ENEX is widely used in automotive, aerospace, electrical, and industrial equipment industries due to its exceptional performance under harsh conditions.
What are some typical technical solutions that utilize PMN55ENEX?
- PMN55ENEX is often employed in applications such as gears, bearings, bushings, housings, and structural components where high mechanical performance is required.
How does PMN55ENEX compare to other engineering plastics?
- PMN55ENEX offers superior mechanical and thermal properties compared to many other engineering plastics, making it a preferred choice for demanding technical solutions.
What are the temperature limits for PMN55ENEX?
- PMN55ENEX can typically withstand continuous use at temperatures up to 150°C, with short-term exposure to higher temperatures possible.
Is PMN55ENEX suitable for outdoor applications?
- Yes, PMN55ENEX has good weatherability and UV resistance, making it suitable for outdoor technical solutions.
Can PMN55ENEX be machined easily?
- PMN55ENEX can be machined using standard metalworking equipment, allowing for precise fabrication of complex components.
Does PMN55ENEX require any special handling or storage considerations?
- PMN55ENEX should be stored in a cool, dry place away from direct sunlight and moisture to maintain its properties.
Are there any specific design guidelines for using PMN55ENEX in technical solutions?
- Designers should consider the material's high stiffness and dimensional stability when designing components to fully leverage the benefits of PMN55ENEX.