Nexperia USA Inc.
图片可能具有代表性。
产品详情请参阅规格.
PHB29N08T,118
查看详情 数据表

PHB29N08T,118

Product Overview

  • Belongs to: Power MOSFET
  • Basic Information:
    • Category: Electronic Component
    • Use: Power switching applications
    • Characteristics: High voltage, low on-resistance, fast switching speed
    • Package: TO-263AB
    • Essence: Efficient power management
    • Packaging/Quantity: Tape and Reel, 800 units per reel

Specifications

  • Voltage Rating: 75V
  • Continuous Drain Current: 29A
  • RDS(ON): 8mΩ
  • Gate Threshold Voltage: 2.5V
  • Maximum Power Dissipation: 110W

Detailed Pin Configuration

  • Pin 1: Gate
  • Pin 2: Drain
  • Pin 3: Source

Functional Features

  • Fast switching speed for improved efficiency
  • Low on-resistance for reduced power loss
  • Enhanced thermal performance for reliability

Advantages

  • High voltage rating suitable for various applications
  • Low on-resistance for minimal power dissipation
  • Reliable and efficient power management

Disadvantages

  • Sensitive to static electricity
  • Requires careful handling during installation

Working Principles

The PHB29N08T,118 operates based on the principles of field-effect transistors, utilizing the gate voltage to control the flow of current between the drain and source terminals.

Detailed Application Field Plans

  • Power Supplies: Used in high-efficiency switch-mode power supplies
  • Motor Control: Employed in motor drive circuits for improved performance
  • Lighting: Utilized in LED lighting systems for efficient power management

Detailed and Complete Alternative Models

  • PHB33N08T,118: Similar specifications with higher continuous drain current
  • PHB25N08T,118: Lower on-resistance with slightly lower voltage rating

This comprehensive entry provides a detailed overview of the PHB29N08T,118 Power MOSFET, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

Word count: 298

10个与PHB29N08T,118在技术解决方案中的应用相关的常见问题及解答

  1. What is PHB29N08T,118?

    • PHB29N08T,118 is a N-channel 75 V, 29 A standard level MOSFET in TO-263 package.

  2. What are the typical applications of PHB29N08T,118?

    • It is commonly used in power management, load switching, and motor control applications.

  3. What is the maximum voltage rating for PHB29N08T,118?

    • The maximum voltage rating for PHB29N08T,118 is 75 volts.

  4. What is the maximum current rating for PHB29N08T,118?

    • The maximum current rating for PHB29N08T,118 is 29 amps.

  5. What is the on-resistance of PHB29N08T,118?

    • The on-resistance of PHB29N08T,118 is typically around 0.019 ohms.

  6. Is PHB29N08T,118 suitable for high-frequency applications?

    • No, PHB29N08T,118 is not specifically designed for high-frequency applications.

  7. What are the thermal characteristics of PHB29N08T,118?

    • The thermal resistance from junction to case (RthJC) is approximately 1.1°C/W.

  8. Can PHB29N08T,118 be used in automotive applications?

    • Yes, PHB29N08T,118 is suitable for use in automotive applications.

  9. Does PHB29N08T,118 require a heatsink for operation?

    • It is recommended to use a heatsink for efficient heat dissipation, especially at higher power levels.

  10. Are there any specific layout considerations for using PHB29N08T,118 in a circuit?

    • It is important to minimize the length and impedance of the connections to PHB29N08T,118 to reduce switching losses and improve performance.