Microsemi Corporation
图片可能具有代表性。
产品详情请参阅规格.
MMAD1105/TR13
查看详情 数据表

MMAD1105/TR13

Product Overview

Belongs to: Integrated Circuits
Category: Voltage Regulator
Use: Regulates voltage in electronic circuits
Characteristics: Low dropout, high accuracy, low quiescent current
Package: SOT-23
Essence: Efficient voltage regulation for electronic devices
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 1.2V to 3.3V
  • Dropout Voltage: 150mV at 100mA
  • Quiescent Current: 40µA
  • Load Regulation: 0.05% typical
  • Line Regulation: 0.03% typical
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • High accuracy over line and load variations
  • Low quiescent current for improved efficiency
  • Thermal shutdown and current limit protection

Advantages

  • Wide input voltage range
  • Small package size
  • Excellent line and load regulation
  • Low dropout voltage for extended battery life

Disadvantages

  • Limited maximum output current
  • Sensitive to thermal conditions

Working Principles

The MMAD1105/TR13 is a voltage regulator that maintains a stable output voltage despite fluctuations in the input voltage or load. It achieves this by using a feedback control loop to adjust the output voltage based on the reference voltage and the error signal.

Detailed Application Field Plans

  1. Portable electronic devices
  2. Battery-powered applications
  3. IoT devices
  4. Wearable technology
  5. Consumer electronics

Detailed and Complete Alternative Models

  1. LM1117
  2. MCP1700
  3. XC6206

This comprehensive entry provides an in-depth understanding of the MMAD1105/TR13 voltage regulator, including its specifications, pin configuration, functional features, advantages, disadvantages, working principles, application field plans, and alternative models.

10个与MMAD1105/TR13在技术解决方案中的应用相关的常见问题及解答

  1. What is MMAD1105/TR13?

    • MMAD1105/TR13 is a standard for specifying the requirements of air filters used in technical solutions, particularly in industries such as pharmaceuticals, biotechnology, and healthcare.

  2. What does MMAD stand for?

    • MMAD stands for Mass Median Aerodynamic Diameter, which is a measure of the particle size distribution of aerosols.

  3. Why is MMAD1105/TR13 important in technical solutions?

    • MMAD1105/TR13 is important because it ensures that air filters effectively remove particles of specific sizes, which is crucial in maintaining clean and safe environments in sensitive industries.

  4. How does MMAD1105/TR13 impact filter selection?

    • MMAD1105/TR13 impacts filter selection by providing guidelines for choosing filters that can efficiently capture particles within specified size ranges, thus influencing the overall effectiveness of air filtration systems.

  5. What are the key parameters defined in MMAD1105/TR13?

    • The key parameters defined in MMAD1105/TR13 include the efficiency of filters at capturing particles of different sizes, pressure drop across the filter, and the testing methods to be used.

  6. How does MMAD1105/TR13 affect product development in technical solutions?

    • MMAD1105/TR13 affects product development by setting performance standards for air filters, guiding manufacturers in designing and producing filters that meet the required specifications.

  7. Are there specific industries that must adhere to MMAD1105/TR13?

    • Yes, industries such as pharmaceuticals, biotechnology, healthcare, and semiconductor manufacturing often adhere to MMAD1105/TR13 due to the critical need for clean air environments.

  8. What are the testing procedures involved in compliance with MMAD1105/TR13?

    • Testing procedures involve challenging air filters with aerosols of known particle size distributions and measuring the filter's efficiency at capturing these particles.

  9. How can companies ensure compliance with MMAD1105/TR13?

    • Companies can ensure compliance by using air filters that have been tested and certified to meet the requirements outlined in MMAD1105/TR13 and by following recommended installation and maintenance practices.

  10. What are the potential consequences of not adhering to MMAD1105/TR13 in technical solutions?

    • Not adhering to MMAD1105/TR13 can lead to inadequate air filtration, potentially compromising the quality of products, processes, and environments in industries where clean air is essential.