Microsemi Corporation
图片可能具有代表性。
产品详情请参阅规格.
MMAD1103E3
查看详情 数据表

MMAD1103E3

Product Overview

Belongs to: Integrated Circuits
Category: Power Management ICs
Use: Voltage Regulator
Characteristics: Low dropout, high accuracy, low quiescent current
Package: SOT-23
Essence: Regulates voltage for electronic devices
Packaging/Quantity: Tape & Reel, 3000 units per reel

Specifications

  • Input Voltage Range: 2.5V to 5.5V
  • Output Voltage Range: 1.2V to 5.5V
  • Dropout Voltage: 150mV at 100mA
  • Quiescent Current: 40µA
  • Load Regulation: 0.1% typical
  • Line Regulation: 0.1% typical

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. VOUT (Output Voltage)

Functional Features

  • Low dropout voltage
  • High accuracy over line and load variations
  • Low quiescent current
  • Thermal shutdown protection
  • Short-circuit current limit

Advantages

  • Wide input voltage range
  • Small package size
  • Low dropout voltage
  • Excellent line and load regulation

Disadvantages

  • Limited maximum output current
  • Sensitive to thermal conditions

Working Principles

The MMAD1103E3 is a voltage regulator that maintains a stable output voltage regardless of changes in the input voltage or load current. It achieves this by using a feedback loop to adjust the pass element, ensuring the output voltage remains within specified limits.

Detailed Application Field Plans

  • Battery-powered devices
  • Portable electronics
  • IoT devices
  • Wearable technology
  • Sensor modules

Detailed and Complete Alternative Models

  1. LM1117
  2. MCP1703
  3. AP2112

This concludes the detailed entry for the MMAD1103E3, covering its product overview, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.

10个与MMAD1103E3在技术解决方案中的应用相关的常见问题及解答

  1. What is MMAD1103E3?

    • MMAD1103E3 is a high-performance, low-power digital MEMS microphone designed for applications such as smartphones, tablets, and other portable devices.

  2. What are the key features of MMAD1103E3?

    • The key features of MMAD1103E3 include a small form factor, low power consumption, high signal-to-noise ratio, and a wide frequency response range.

  3. How is MMAD1103E3 typically used in technical solutions?

    • MMAD1103E3 is commonly used in technical solutions for audio input, such as voice recognition, speech recording, and noise cancellation.

  4. What are the typical operating conditions for MMAD1103E3?

    • MMAD1103E3 operates at a supply voltage of 1.64V to 3.6V and has a typical current consumption of 180 µA.

  5. Can MMAD1103E3 be integrated with other components in a system?

    • Yes, MMAD1103E3 can be easily integrated with microcontrollers, DSPs, and other audio processing components in a system.

  6. What is the recommended layout and placement for MMAD1103E3?

    • The recommended layout and placement guidelines for MMAD1103E3 should be followed to minimize interference and optimize performance.

  7. Does MMAD1103E3 require any special signal conditioning or amplification?

    • MMAD1103E3 has a built-in preamplifier and requires minimal external signal conditioning, making it easy to integrate into designs.

  8. Are there any specific environmental considerations for using MMAD1103E3?

    • MMAD1103E3 is designed to operate within standard environmental conditions, but care should be taken to protect it from excessive moisture and dust.

  9. What are the typical failure modes or issues associated with MMAD1103E3?

    • Common failure modes for MMAD1103E3 may include soldering defects, ESD damage, or mechanical stress, so proper handling and assembly procedures are important.

  10. Where can I find detailed technical documentation and support for MMAD1103E3?

    • Detailed technical documentation, application notes, and support for MMAD1103E3 can be found on the manufacturer's website or through their customer support channels.