产品详情请参阅规格.
MAX6501UKP115+TG48
Product Overview
- Category: Voltage Regulator
- Use: Power management
- Characteristics: Low dropout, low quiescent current, high accuracy
- Package: 5-pin SOT23
- Essence: Regulates voltage with high efficiency
- Packaging/Quantity: Tape and reel, 3000 units per reel
Specifications
- Input Voltage Range: 2.5V to 11V
- Output Voltage: 1.15V
- Output Current: 150mA
- Quiescent Current: 20µA
- Dropout Voltage: 160mV at 100mA load
- Operating Temperature Range: -40°C to +125°C
Detailed Pin Configuration
- GND
- FB (Feedback)
- EN (Enable)
- NC (No Connection)
- VOUT
Functional Features
- Low dropout voltage
- Low quiescent current
- High accuracy over line and load variations
- Thermal shutdown protection
- Short-circuit and reverse-current protection
Advantages and Disadvantages
Advantages
- Wide input voltage range
- Small package size
- Low dropout voltage
- Low quiescent current
Disadvantages
- Limited output current capacity
- Limited output voltage options
Working Principles
The MAX6501UKP115+TG48 is a low-dropout linear voltage regulator that provides a regulated output voltage from an unregulated input voltage. It uses a feedback mechanism to maintain a stable output voltage despite changes in the input voltage or load conditions.
Detailed Application Field Plans
The MAX6501UKP115+TG48 is suitable for various battery-powered applications, portable devices, and other systems requiring a regulated power supply. It can be used in handheld instruments, consumer electronics, and industrial control systems.
Detailed and Complete Alternative Models
- MAX6502UKP115+TG48
- MAX6503UKP115+TG48
- MAX6504UKP115+TG48
- MAX6505UKP115+TG48
This completes the entry for MAX6501UKP115+TG48, covering its product details, specifications, features, advantages, disadvantages, working principles, application field plans, and alternative models.
10个与MAX6501UKP115+TG48在技术解决方案中的应用相关的常见问题及解答
What is the MAX6501UKP115+TG48?
- The MAX6501UKP115+TG48 is a low-power, single-voltage microprocessor supervisory circuit designed to monitor power supplies in microprocessor and digital systems.
What is the operating voltage range of MAX6501UKP115+TG48?
- The operating voltage range of MAX6501UKP115+TG48 is 1.15V to 5.5V.
What is the purpose of using MAX6501UKP115+TG48 in a technical solution?
- MAX6501UKP115+TG48 is used to monitor the power supply voltage and provide a reset signal to the microprocessor when the voltage falls below a predetermined threshold, ensuring proper system operation.
How does MAX6501UKP115+TG48 help in improving system reliability?
- By monitoring the power supply voltage, MAX6501UKP115+TG48 helps prevent the microprocessor from operating outside its specified voltage range, thereby enhancing system reliability.
What are the key features of MAX6501UKP115+TG48?
- Some key features of MAX6501UKP115+TG48 include low quiescent current, adjustable reset timeout period, and wide operating voltage range.
Can MAX6501UKP115+TG48 be used in battery-powered applications?
- Yes, MAX6501UKP115+TG48's low quiescent current makes it suitable for battery-powered applications where power efficiency is crucial.
How is MAX6501UKP115+TG48 typically connected in a circuit?
- MAX6501UKP115+TG48 is typically connected between the power supply and the microprocessor, with appropriate decoupling capacitors and pull-up resistors as per the datasheet recommendations.
What are the potential applications of MAX6501UKP115+TG48?
- MAX6501UKP115+TG48 can be used in various applications such as embedded systems, industrial control systems, automotive electronics, and portable devices.
Does MAX6501UKP115+TG48 have built-in protection features?
- Yes, MAX6501UKP115+TG48 includes built-in hysteresis to prevent erratic reset operation due to voltage fluctuations or noise on the power supply line.
Is MAX6501UKP115+TG48 available in different package options?
- Yes, MAX6501UKP115+TG48 is available in different package options to accommodate various assembly and mounting requirements, including the TG48 package.