Macronix
图片可能具有代表性。
产品详情请参阅规格.
MX25R8035FZUIL0
查看详情 数据表

MX25R8035FZUIL0

Product Overview

  • Category: Serial NOR Flash Memory
  • Use: Non-volatile storage for various electronic devices
  • Characteristics: High-speed, low-power consumption, small package size
  • Package: SOP8 208-mil
  • Essence: Reliable and fast non-volatile memory storage
  • Packaging/Quantity: Tape & Reel, 2500 pieces per reel

Specifications

  • Memory Size: 8M-bit
  • Interface: SPI
  • Operating Voltage: 2.7V - 3.6V
  • Operating Temperature: -40°C to 85°C
  • Data Retention: 20 years
  • Erase/Program Cycle Endurance: 100,000 cycles

Detailed Pin Configuration

  1. /CS (Chip Select)
  2. SO (Serial Data Output)
  3. SI (Serial Data Input)
  4. SCLK (Serial Clock)
  5. VSS (Ground)
  6. HOLD#/RESET#
  7. WP#/ACC
  8. VCC (Power Supply)

Functional Features

  • Fast Read and Program Speed
  • Low Power Consumption
  • Flexible Erase Capability
  • Secure OTP Area
  • Software/Hardware Write Protection

Advantages and Disadvantages

Advantages

  • High-speed data transfer
  • Low power consumption
  • Small package size
  • Secure OTP area for sensitive data

Disadvantages

  • Limited erase/program cycle endurance
  • Vulnerable to environmental extremes

Working Principles

The MX25R8035FZUIL0 operates on the Serial Peripheral Interface (SPI) protocol, allowing for high-speed communication with a host microcontroller. It utilizes a floating gate technology for non-volatile data storage, enabling reliable and fast read/write operations.

Detailed Application Field Plans

The MX25R8035FZUIL0 is suitable for a wide range of applications including: - Consumer Electronics - Industrial Control Systems - Automotive Infotainment Systems - Networking Equipment - Medical Devices

Detailed and Complete Alternative Models

  • MX25R8035F: Similar specifications and features
  • W25Q80BV: Comparable 8M-bit SPI NOR Flash Memory

This completes the entry for MX25R8035FZUIL0 in the English editing encyclopedia format.

10个与MX25R8035FZUIL0在技术解决方案中的应用相关的常见问题及解答

  1. What is the MX25R8035FZUIL0?

    • The MX25R8035FZUIL0 is a 8M-bit serial NOR Flash memory with advanced features, suitable for a wide range of technical solutions.

  2. What are the key features of MX25R8035FZUIL0?

    • The key features include a high-speed clock frequency, low power consumption, deep power-down mode, and flexible erase/program capability.

  3. How can MX25R8035FZUIL0 be used in embedded systems?

    • MX25R8035FZUIL0 can be used to store boot code, system parameters, and application code in embedded systems, providing non-volatile memory storage.

  4. What are the typical applications of MX25R8035FZUIL0?

    • Typical applications include consumer electronics, industrial automation, automotive, networking, and more, where non-volatile memory storage is required.

  5. What is the interface protocol supported by MX25R8035FZUIL0?

    • MX25R8035FZUIL0 supports the industry-standard Serial Peripheral Interface (SPI) protocol for communication with microcontrollers and other devices.

  6. What are the operating voltage and temperature range of MX25R8035FZUIL0?

    • The operating voltage range is from 2.7V to 3.6V, and the industrial temperature range is from -40°C to 85°C.

  7. Can MX25R8035FZUIL0 be used for over-the-air (OTA) firmware updates?

    • Yes, MX25R8035FZUIL0 can be used for OTA firmware updates in IoT devices and other applications, providing reliable and secure storage for updated firmware.

  8. Does MX25R8035FZUIL0 support hardware and software protection features?

    • Yes, MX25R8035FZUIL0 supports hardware write protection and software-based protection features to prevent unauthorized access and modification of data.

  9. What are the advantages of using MX25R8035FZUIL0 in technical solutions?

    • The advantages include fast read and program operations, low power consumption, small form factor, and compatibility with various microcontrollers and processors.

  10. Are there any design considerations when integrating MX25R8035FZUIL0 into a technical solution?

    • Design considerations include proper signal integrity, layout guidelines, power supply decoupling, and adherence to recommended operating conditions to ensure reliable performance.