0278.100V Product Overview
Product Identification
- Product Name: 0278.100V
- Category: Electronic Component
- Use: Voltage Regulator
- Characteristics: Precision, Low Dropout, Adjustable Output
- Package: TO-220, SMD
- Essence: Regulates voltage to a precise level
- Packaging/Quantity: Typically sold in reels or tubes, quantity varies by manufacturer
Specifications
- Input Voltage Range: 4.5V to 20V
- Output Voltage Range: 1.25V to 18V
- Output Current: Up to 1A
- Dropout Voltage: 0.3V at 1A
- Operating Temperature Range: -40°C to 125°C
Detailed Pin Configuration
- Pin 1: Input Voltage
- Pin 2: Ground
- Pin 3: Output Voltage
Functional Features
- Precision Regulation: Provides accurate and stable output voltage
- Low Dropout: Maintains regulation even when input voltage is close to the output voltage
- Adjustable Output: Allows for flexibility in setting the desired output voltage
Advantages and Disadvantages
- Advantages:
- Precise voltage regulation
- Low dropout voltage
- Adjustable output
- Disadvantages:
- Limited maximum output current
- Requires heat sinking for high power applications
Working Principles
The 0278.100V voltage regulator uses a feedback control loop to maintain a constant output voltage regardless of changes in input voltage or load.
Detailed Application Field Plans
- Consumer Electronics: Used in portable devices, battery-powered equipment
- Automotive: Voltage stabilization in automotive electronics
- Industrial: Control systems, instrumentation, and power supplies
Detailed and Complete Alternative Models
- LM317: Adjustable positive voltage regulator
- LM1117: Low dropout voltage regulator
- LT1086: High current adjustable voltage regulator
This comprehensive entry provides an in-depth understanding of the 0278.100V voltage regulator, including its specifications, features, applications, and alternatives.
Word count: 314
10个与0278.100V在技术解决方案中的应用相关的常见问题及解答
What is 0278.100V?
- 0278.100V is a technical specification or standard used in electrical engineering and electronic applications.
What does 0278.100V specify?
- It specifies the voltage rating for a particular component, circuit, or system.
How is 0278.100V applied in technical solutions?
- It is used to ensure that components and systems are designed and operated within specified voltage limits to maintain safety and performance.
Why is 0278.100V important in technical solutions?
- It is important because it helps prevent damage to equipment, ensures safety, and maintains reliability in electrical and electronic systems.
Where can I find information about 0278.100V?
- Information about 0278.100V can be found in technical standards documents, manufacturer datasheets, and industry guidelines.
Are there different versions of 0278.100V?
- Yes, there may be different versions or revisions of 0278.100V to reflect updates in technology and safety standards.
How do I determine if a component meets the requirements of 0278.100V?
- You can verify if a component meets the requirements by checking its datasheet or certification documentation for compliance with the specified voltage rating.
Can 0278.100V be applied to both AC and DC systems?
- Yes, 0278.100V can be applied to both AC and DC systems to ensure proper voltage ratings are maintained.
What are the consequences of not adhering to 0278.100V?
- Failure to adhere to 0278.100V could result in equipment damage, safety hazards, and non-compliance with industry regulations.
Is 0278.100V an international standard?
- Depending on the specific standard organization, 0278.100V may be recognized internationally, but it's important to verify its applicability in different regions.