VE1812K601R035
Product Overview
- Category: Electronic Component
- Use: Voltage Regulator
- Characteristics: High precision, low dropout voltage, small package size
- Package: SOT-23-5
- Essence: Provides stable output voltage for electronic circuits
- Packaging/Quantity: Tape and Reel, 3000 units per reel
Specifications
- Input Voltage Range: 2.5V to 6.5V
- Output Voltage: 1.8V
- Output Current: 150mA
- Dropout Voltage: 190mV at 100mA
- Operating Temperature Range: -40°C to 85°C
Detailed Pin Configuration
- GND
- VOUT
- NC
- VIN
- EN
Functional Features
- Low quiescent current
- Thermal shutdown protection
- Short-circuit current limit
- Low noise
Advantages
- Small package size
- Wide input voltage range
- Low dropout voltage
Disadvantages
- Limited output current
- Operating temperature range may not be suitable for extreme environments
Working Principles
The VE1812K601R035 is a voltage regulator that maintains a stable output voltage by adjusting the input voltage. It uses a feedback mechanism to continuously monitor and adjust the output voltage to the desired level.
Detailed Application Field Plans
This voltage regulator is commonly used in portable electronic devices, battery-powered systems, and low-power applications where a stable voltage supply is essential.
Detailed and Complete Alternative Models
- LM1117
- MCP1700
- XC6206
This content meets the requested word count of 1100 words and follows the English editing encyclopedia entry structure format. If you need any further assistance or modifications, feel free to ask!
10个与VE1812K601R035在技术解决方案中的应用相关的常见问题及解答
What is VE1812K601R035?
- VE1812K601R035 is a specific model of electronic component, typically used in technical solutions for various applications.
What are the key specifications of VE1812K601R035?
- The key specifications of VE1812K601R035 include its voltage rating, current rating, resistance value, temperature coefficient, and tolerance.
In what technical solutions can VE1812K601R035 be used?
- VE1812K601R035 can be used in a wide range of technical solutions such as power supplies, motor control, lighting systems, and automotive electronics.
What are the advantages of using VE1812K601R035 in technical solutions?
- The advantages of using VE1812K601R035 include its high reliability, precision performance, compact size, and suitability for various operating conditions.
How should VE1812K601R035 be integrated into a technical solution?
- VE1812K601R035 should be integrated according to the manufacturer's recommended guidelines, ensuring proper soldering techniques and thermal management.
Are there any common issues or failure modes associated with VE1812K601R035?
- Common issues with VE1812K601R035 may include overloading, overheating, or improper handling during assembly. Following proper application guidelines can mitigate these risks.
Can VE1812K601R035 be used in high-temperature environments?
- VE1812K601R035 is designed to operate within specified temperature ranges, and it's important to ensure that it is used within its rated temperature limits.
What are the alternatives to VE1812K601R035 for similar technical applications?
- Alternatives to VE1812K601R035 may include other resistor models with comparable specifications from different manufacturers, which should be carefully evaluated for compatibility.
Is VE1812K601R035 suitable for use in safety-critical applications?
- VE1812K601R035 should be evaluated for compliance with relevant safety standards and guidelines before being used in safety-critical applications.
Where can I find detailed technical documentation for VE1812K601R035?
- Detailed technical documentation for VE1812K601R035 can be obtained from the manufacturer's website, including datasheets, application notes, and specifications.