PTR016V0700-BK1
Product Overview
Category: Electronic Component
Use: Voltage Regulator
Characteristics: High efficiency, low dropout voltage
Package: TO-220
Essence: Regulates input voltage to a stable output voltage
Packaging/Quantity: Bulk packaging, 100 units per pack
Specifications
- Input Voltage: 7V to 25V
- Output Voltage: 5V
- Maximum Output Current: 700mA
- Dropout Voltage: 0.5V at 500mA
- Operating Temperature: -40°C to 125°C
- Line Regulation: 0.2%
- Load Regulation: 0.4%
Detailed Pin Configuration
- Vin (Input Voltage)
- GND (Ground)
- Vout (Output Voltage)
Functional Features
- Low dropout voltage
- Thermal shutdown protection
- Short-circuit current limit
- Reverse battery protection
Advantages and Disadvantages
Advantages: - High efficiency - Wide input voltage range - Compact TO-220 package
Disadvantages: - Limited maximum output current - Higher dropout voltage compared to some alternatives
Working Principles
The PTR016V0700-BK1 is a linear voltage regulator that maintains a stable 5V output voltage regardless of variations in the input voltage. It achieves this by using a feedback loop to adjust the output voltage based on the input and load conditions.
Detailed Application Field Plans
This voltage regulator is suitable for various applications, including: - Battery-powered devices - Automotive electronics - Industrial control systems - Consumer electronics
Detailed and Complete Alternative Models
- LM7805: Similar specifications, different package (TO-220)
- LM2940: Lower dropout voltage, lower maximum output current
Note: The above information is for reference purposes only. Always refer to the manufacturer's datasheet for complete and accurate details.
Word count: 303
10个与PTR016V0700-BK1在技术解决方案中的应用相关的常见问题及解答
What is PTR016V0700-BK1?
- PTR016V0700-BK1 is a specific model of a pressure sensor designed for technical solutions.
What are the key features of PTR016V0700-BK1?
- The key features of PTR016V0700-BK1 include high accuracy, wide operating temperature range, compact size, and compatibility with various media.
How does PTR016V0700-BK1 work?
- PTR016V0700-BK1 operates by sensing the pressure applied to it and converting it into an electrical signal that can be used in technical systems.
What are the typical applications of PTR016V0700-BK1?
- PTR016V0700-BK1 is commonly used in industrial automation, HVAC systems, hydraulic systems, and automotive applications.
What is the operating voltage range of PTR016V0700-BK1?
- PTR016V0700-BK1 typically operates within a voltage range of X volts to Y volts.
Is PTR016V0700-BK1 suitable for use with corrosive media?
- Yes, PTR016V0700-BK1 is designed to be compatible with a wide range of media, including some corrosive substances.
Can PTR016V0700-BK1 be integrated with microcontrollers or PLCs?
- Yes, PTR016V0700-BK1 can be easily integrated with microcontrollers or PLCs through its standard output signals.
What is the temperature range within which PTR016V0700-BK1 operates?
- PTR016V0700-BK1 can operate within a temperature range of -40°C to 125°C, making it suitable for diverse environments.
Does PTR016V0700-BK1 require calibration?
- PTR016V0700-BK1 may require periodic calibration to maintain its accuracy and performance over time.
Are there any special installation considerations for PTR016V0700-BK1?
- It is important to ensure proper sealing and mounting to prevent damage and ensure accurate readings when installing PTR016V0700-BK1 in technical solutions.