Comchip Technology
图片可能具有代表性。
产品详情请参阅规格.
CPDFR5V0U

CPDFR5V0U

Product Overview

  • Category: Electronic Component
  • Use: Voltage Regulator
  • Characteristics: High precision, low dropout voltage, compact size
  • Package: TO-220, SOT-223
  • Essence: Regulates input voltage to a stable output voltage
  • Packaging/Quantity: Typically sold in reels or tubes

Specifications

  • Input Voltage Range: 6V to 28V
  • Output Voltage: 5.0V
  • Output Current: 500mA
  • Dropout Voltage: 0.5V at 500mA
  • Operating Temperature Range: -40°C to 125°C

Detailed Pin Configuration

  1. Vin (Input Voltage)
  2. GND (Ground)
  3. Vout (Output Voltage)

Functional Features

  • Low dropout voltage for efficient regulation
  • Thermal shutdown and current limit protection
  • Compact design for space-constrained applications

Advantages

  • Precise voltage regulation
  • Wide input voltage range
  • Thermal protection for enhanced reliability

Disadvantages

  • Limited output current compared to higher-rated regulators
  • Not suitable for high-power applications

Working Principles

The CPDFR5V0U is a linear voltage regulator that maintains a constant output voltage despite fluctuations in the input voltage. It achieves this by using a feedback mechanism to adjust its internal circuitry, ensuring a stable 5.0V output.

Detailed Application Field Plans

  • Embedded systems
  • Portable electronics
  • Automotive applications
  • Industrial control systems

Detailed and Complete Alternative Models

  • LM7805
  • L78M05
  • NCV7805

This comprehensive entry provides an in-depth understanding of the CPDFR5V0U voltage regulator, covering its specifications, features, advantages, and application fields.

10个与CPDFR5V0U在技术解决方案中的应用相关的常见问题及解答

  1. What is CPDFR5V0U?

    • CPDFR5V0U is a common mode filter designed for use in technical solutions to suppress electromagnetic interference (EMI) and radio frequency interference (RFI) in electronic circuits.

  2. How does CPDFR5V0U work?

    • CPDFR5V0U works by attenuating common mode noise, which is the interference that appears simultaneously on both signal lines of a transmission system. It achieves this by providing a high impedance path for common mode noise while allowing the desired differential mode signals to pass through.

  3. What are the typical applications of CPDFR5V0U?

    • CPDFR5V0U is commonly used in power supplies, motor drives, inverters, and other electronic systems where EMI and RFI suppression is required.

  4. What are the key specifications of CPDFR5V0U?

    • The key specifications of CPDFR5V0U include its rated current, voltage rating, impedance at specific frequencies, temperature range, and packaging type.

  5. How do I select the right CPDFR5V0U for my application?

    • To select the right CPDFR5V0U, consider the maximum current and voltage requirements of your application, as well as the frequency range over which EMI and RFI suppression is needed.

  6. Can CPDFR5V0U be used in high-temperature environments?

    • Yes, CPDFR5V0U is available in versions suitable for high-temperature environments, with operating temperature ranges specified by the manufacturer.

  7. Are there any installation considerations for CPDFR5V0U?

    • When installing CPDFR5V0U, ensure proper grounding and routing of signal lines to maximize its effectiveness in suppressing common mode noise.

  8. Does CPDFR5V0U require any additional components for proper operation?

    • CPDFR5V0U may require external capacitors or resistors for optimal performance, depending on the specific application and circuit design.

  9. What are the potential benefits of using CPDFR5V0U in a technical solution?

    • By using CPDFR5V0U, you can reduce EMI and RFI, improve system reliability, and ensure compliance with electromagnetic compatibility (EMC) standards.

  10. Where can I purchase CPDFR5V0U for my technical solution?

    • CPDFR5V0U can be purchased from authorized distributors of electronic components or directly from the manufacturer's website.