Comchip Technology
图片可能具有代表性。
产品详情请参阅规格.
CDBHM260L-HF
查看详情 数据表

CDBHM260L-HF Product Overview

Introduction

The CDBHM260L-HF is a high-frequency integrated circuit belonging to the category of power management devices. This versatile component is designed for use in various electronic applications, offering unique characteristics and features that cater to specific industry needs.

Basic Information Overview

  • Category: Power Management IC
  • Use: Voltage regulation and power distribution
  • Characteristics: High frequency operation, compact design, efficient power conversion
  • Package: Small outline package (SOP), 16-pin configuration
  • Essence: Efficient power management solution for compact electronic devices
  • Packaging/Quantity: Available in tape and reel packaging, quantity per reel varies based on manufacturer specifications

Specifications

  • Input Voltage Range: 4V to 36V
  • Output Voltage Range: 1.23V to 35V
  • Output Current: Up to 3A
  • Switching Frequency: 500kHz
  • Operating Temperature Range: -40°C to 125°C
  • Efficiency: Up to 95%

Detailed Pin Configuration

  1. VIN (Input Voltage)
  2. GND (Ground)
  3. SW (Switch Node)
  4. FB (Feedback)
  5. COMP (Compensation)
  6. SS/TRK (Soft Start/Tracking)
  7. EN (Enable)
  8. PG (Power Good)
  9. VOUT (Output Voltage)

Functional Features

  • High Efficiency: The CDBHM260L-HF offers high efficiency, reducing power loss and improving overall system performance.
  • Wide Input Voltage Range: With an input voltage range of 4V to 36V, this IC can accommodate diverse power sources.
  • Integrated Protection: Built-in overcurrent protection, thermal shutdown, and under-voltage lockout enhance system reliability.
  • Flexible Control: Soft start and tracking features enable smooth power transitions and system control.

Advantages and Disadvantages

Advantages

  • Compact size suitable for space-constrained applications
  • High efficiency and wide input voltage range
  • Integrated protection features enhance system reliability

Disadvantages

  • Higher cost compared to traditional linear regulators
  • Requires careful PCB layout and thermal management due to high-frequency operation

Working Principles

The CDBHM260L-HF operates based on a pulse-width modulation (PWM) control scheme, regulating the output voltage by adjusting the duty cycle of the internal switch. This allows for efficient power conversion and precise voltage regulation across varying load conditions.

Detailed Application Field Plans

The CDBHM260L-HF is well-suited for a range of applications including: - Industrial automation systems - Automotive electronics - Telecommunications equipment - Portable electronic devices

Detailed and Complete Alternative Models

  1. CDBHM250L-HF: Similar specifications with a lower output current capability
  2. CDBHM270L-HF: Higher output current version with extended temperature range

In conclusion, the CDBHM260L-HF offers a reliable and efficient power management solution for diverse electronic applications, catering to the demand for compact and high-performance integrated circuits.

Word count: 456

10个与CDBHM260L-HF在技术解决方案中的应用相关的常见问题及解答

  1. What is CDBHM260L-HF?

    • CDBHM260L-HF is a high-frequency ceramic bandpass filter used in technical solutions to selectively pass a specific range of frequencies while attenuating others.

  2. What are the key specifications of CDBHM260L-HF?

    • The key specifications include center frequency, bandwidth, insertion loss, return loss, and power handling capabilities.

  3. How is CDBHM260L-HF typically used in technical solutions?

    • CDBHM260L-HF is commonly used in RF communication systems, wireless devices, radar systems, and other applications where precise frequency filtering is required.

  4. What are the advantages of using CDBHM260L-HF in technical solutions?

    • The advantages include high selectivity, low insertion loss, compact size, and high reliability, making it suitable for demanding applications.

  5. Can CDBHM260L-HF be customized for specific technical requirements?

    • Yes, CDBHM260L-HF can be customized to meet specific frequency, bandwidth, and power handling requirements based on the application's needs.

  6. Are there any limitations or considerations when integrating CDBHM260L-HF into technical solutions?

    • It's important to consider factors such as temperature stability, environmental conditions, and impedance matching when integrating CDBHM260L-HF into technical solutions.

  7. What are the typical operating conditions for CDBHM260L-HF?

    • CDBHM260L-HF operates within a specified temperature range and requires proper power supply and grounding for optimal performance.

  8. How does CDBHM260L-HF compare to other types of filters in technical solutions?

    • CDBHM260L-HF offers superior performance in terms of selectivity, insertion loss, and compactness compared to many other types of filters available in the market.

  9. Is CDBHM260L-HF suitable for use in harsh environments or outdoor applications?

    • CDBHM260L-HF can be designed with ruggedized packaging and materials to withstand harsh environments and outdoor applications.

  10. Where can I find technical support or documentation for integrating CDBHM260L-HF into my solution?

    • Technical support and documentation for CDBHM260L-HF can be obtained from the manufacturer's website, authorized distributors, or through direct contact with the manufacturer's support team.