Cantherm
图片可能具有代表性。
产品详情请参阅规格.
MF72-006D9
查看详情 数据表

MF72-006D9: Product Overview and Specifications

Introduction

MF72-006D9 is a thermistor belonging to the category of electronic components. It is widely used in various electronic circuits for its unique characteristics and versatile applications.

Basic Information Overview

  • Category: Electronic Component
  • Use: Temperature Sensing and Compensation
  • Characteristics: High Sensitivity, Small Size, Wide Operating Temperature Range
  • Package: Radial Leaded
  • Essence: NTC Thermistor
  • Packaging/Quantity: Bulk Packaging, 1000 pieces per pack

Specifications

  • Resistance at 25°C: 6Ω ± 20%
  • Maximum Power Dissipation: 400mW
  • Operating Temperature Range: -55°C to 125°C
  • Thermal Time Constant: ≤7s (in still air)

Detailed Pin Configuration

The MF72-006D9 thermistor has a radial leaded package with two leads. The pin configuration is as follows: - Pin 1: Positive Lead - Pin 2: Negative Lead

Functional Features

  • Temperature Sensing: Provides accurate temperature measurement and compensation in electronic circuits.
  • High Sensitivity: Responds quickly to changes in temperature, making it suitable for precision applications.
  • Stability: Maintains consistent performance over a wide temperature range.

Advantages and Disadvantages

Advantages

  • High sensitivity enables precise temperature measurements.
  • Small size allows for integration into compact designs.
  • Wide operating temperature range makes it suitable for diverse applications.

Disadvantages

  • Limited power dissipation capability compared to larger thermistors.
  • Sensitivity to mechanical stress may require careful handling during assembly.

Working Principles

MF72-006D9 operates based on the negative temperature coefficient (NTC) principle. As the temperature increases, the resistance of the thermistor decreases, allowing it to accurately sense and compensate for temperature variations in electronic circuits.

Detailed Application Field Plans

  • Temperature Compensation: Used in power supplies, battery chargers, and motor control circuits to compensate for temperature-induced variations.
  • Temperature Measurement: Integrated into environmental monitoring systems and industrial equipment for accurate temperature sensing.
  • Thermal Protection: Employed in electronic devices to monitor and prevent overheating.

Detailed and Complete Alternative Models

  • MF72-005D9: Similar specifications with slightly lower resistance at 25°C.
  • MF72-007D9: Similar specifications with slightly higher resistance at 25°C.
  • NTCLE100E3103JB0: Alternative NTC thermistor with comparable characteristics and package type.

In conclusion, MF72-006D9 is a versatile NTC thermistor with high sensitivity and wide application potential in temperature sensing and compensation circuits.

[Word Count: 398]

10个与MF72-006D9在技术解决方案中的应用相关的常见问题及解答

  1. What is MF72-006D9?

    • MF72-006D9 is a type of thermistor, specifically a NTC (Negative Temperature Coefficient) thermistor, which means its resistance decreases as temperature increases.

  2. What are the typical applications of MF72-006D9?

    • MF72-006D9 is commonly used in temperature sensing, temperature compensation, and overcurrent protection in various electronic devices and circuits.

  3. What is the resistance value of MF72-006D9 at room temperature?

    • The resistance of MF72-006D9 at room temperature is typically 6 ohms.

  4. How does MF72-006D9 behave in different temperature environments?

    • MF72-006D9 exhibits a non-linear response to temperature changes, with its resistance decreasing as the temperature rises.

  5. Can MF72-006D9 be used for overcurrent protection?

    • Yes, MF72-006D9 can be utilized as a current limiter or overcurrent protection device due to its property of increasing resistance when subjected to higher currents.

  6. What are the advantages of using MF72-006D9 in technical solutions?

    • Some advantages include its small size, high sensitivity to temperature changes, and its ability to provide stable and reliable performance in various applications.

  7. Are there any limitations to consider when using MF72-006D9?

    • One limitation is its non-linear response to temperature changes, which may require careful calibration in certain applications.

  8. Can MF72-006D9 be used in automotive electronics?

    • Yes, MF72-006D9 is suitable for use in automotive electronics for temperature sensing and compensation purposes.

  9. What is the operating temperature range of MF72-006D9?

    • The typical operating temperature range of MF72-006D9 is -55°C to 125°C.

  10. Are there any specific soldering or handling considerations for MF72-006D9?

    • It is important to follow the manufacturer's guidelines for soldering and handling to avoid damaging the thermistor, as it is sensitive to excessive heat and mechanical stress during assembly.