Cantherm
图片可能具有代表性。
产品详情请参阅规格.
MF72-000.7D25
查看详情 数据表

MF72-000.7D25

Introduction

MF72-000.7D25 is a type of thermistor that belongs to the category of NTC (Negative Temperature Coefficient) thermistors. It is widely used in various electronic and electrical applications due to its unique characteristics and versatile nature.

Basic Information Overview

  • Category: NTC Thermistor
  • Use: Temperature sensing, temperature compensation, inrush current limiting
  • Characteristics: High sensitivity to temperature changes, small size, fast response time
  • Package: Radial leaded disc
  • Essence: Sensitive temperature measurement and control
  • Packaging/Quantity: Typically packaged in reels or bulk quantities

Specifications

  • Resistance at 25°C: 0.7Ω
  • Tolerance: ±20%
  • Maximum Power Rating: 2.5W
  • Operating Temperature Range: -55°C to 125°C
  • Thermal Time Constant: 10s max

Detailed Pin Configuration

The MF72-000.7D25 thermistor has two radial leads for connection. The pin configuration is as follows: - Pin 1: Positive lead - Pin 2: Negative lead

Functional Features

  • Temperature Sensing: Provides accurate temperature measurements due to its high sensitivity.
  • Temperature Compensation: Used to compensate for temperature variations in electronic circuits.
  • Inrush Current Limiting: Helps limit the inrush current during power-on situations, protecting electronic components.

Advantages and Disadvantages

Advantages

  • High sensitivity to temperature changes
  • Fast response time
  • Small size allows for integration into compact designs

Disadvantages

  • Tolerance of ±20% may require additional calibration in some applications
  • Limited operating temperature range compared to some other thermistors

Working Principles

MF72-000.7D25 operates based on the principle of the negative temperature coefficient, meaning its resistance decreases as the temperature increases. This property makes it suitable for various temperature sensing and compensation applications.

Detailed Application Field Plans

  • Temperature Measurement: Used in temperature sensors for industrial and consumer applications.
  • Temperature Compensation: Integrated into electronic circuits to compensate for temperature-induced variations.
  • Inrush Current Limiting: Employed in power supply circuits to limit the inrush current during startup.

Detailed and Complete Alternative Models

  • NTC Thermistor MF72-000.5D15: Similar characteristics with a lower resistance at 25°C
  • NTC Thermistor MF72-001.0D50: Higher resistance at 25°C with similar operating characteristics
  • NTC Thermistor MF72-002.0D75: Double the resistance at 25°C for different temperature sensing requirements

In conclusion, MF72-000.7D25 is a versatile NTC thermistor with various applications in temperature sensing, compensation, and inrush current limiting. Its high sensitivity and fast response time make it a valuable component in electronic and electrical systems.

[Word count: 413]

10个与MF72-000.7D25在技术解决方案中的应用相关的常见问题及解答

Sure, here are 10 common questions and answers related to the application of MF72-000.7D25 in technical solutions:

  1. What is the MF72-000.7D25?

    • The MF72-000.7D25 is a type of thermistor, specifically a NTC (Negative Temperature Coefficient) thermistor, with a resistance of 0.7 ohms at 25°C.

  2. What are the typical applications of MF72-000.7D25?

    • It is commonly used for overcurrent protection, inrush current limiting, temperature compensation, and temperature measurement in various electronic circuits and devices.

  3. How does MF72-000.7D25 provide overcurrent protection?

    • When the current flowing through the MF72-000.7D25 exceeds a certain threshold, its resistance increases significantly, limiting the current flow and protecting the circuit from damage.

  4. Can MF72-000.7D25 be used for inrush current limiting?

    • Yes, it can be used to limit the inrush current when a device is powered on, by temporarily increasing its resistance and reducing the initial surge of current.

  5. What is the temperature coefficient of MF72-000.7D25?

    • The temperature coefficient is negative, meaning that as the temperature increases, the resistance of the thermistor decreases.

  6. How is MF72-000.7D25 used for temperature compensation?

    • It can be incorporated into circuits to compensate for changes in temperature, ensuring stable performance of components or systems over a range of temperatures.

  7. What is the maximum operating temperature of MF72-000.7D25?

    • The maximum operating temperature is typically around 150°C, beyond which the thermistor may experience permanent damage.

  8. Can MF72-000.7D25 be used for temperature measurement?

    • Yes, it can be used in conjunction with appropriate circuitry to measure temperature based on its resistance at different temperatures.

  9. What are the key considerations when integrating MF72-000.7D25 into a circuit?

    • Factors such as power dissipation, voltage rating, and thermal management should be carefully considered to ensure proper functionality and reliability.

  10. Where can I find detailed specifications and application notes for MF72-000.7D25?

    • Detailed specifications and application notes can usually be found in the product datasheet provided by the manufacturer or supplier of the thermistor. Additionally, technical support from the manufacturer can also provide valuable information and guidance.