MF52A1104F4150
Product Overview
- Category: Temperature Sensor
- Use: Used to measure temperature in various electronic devices and systems.
- Characteristics: High accuracy, small size, wide temperature range.
- Package: TO-92 package
- Essence: NTC thermistor
- Packaging/Quantity: Bulk packaging, quantity varies based on supplier.
Specifications
- Resistance at 25°C: 100kΩ ±1%
- B Value: 4150K ±1%
- Operating Temperature Range: -40°C to 125°C
- Maximum Power Dissipation: 450mW
- Thermal Time Constant: 7s (in still air)
Detailed Pin Configuration
- Pin 1: Connected to the NTC thermistor element
- Pin 2: Not connected
- Pin 3: Connected to the NTC thermistor element
Functional Features
- Accurate temperature measurement
- Small form factor
- Wide operating temperature range
- Fast response time
Advantages
- High accuracy
- Compact size
- Suitable for a wide range of applications
- Quick response to temperature changes
Disadvantages
- Limited maximum power dissipation
- Requires careful handling due to small size
Working Principles
The MF52A1104F4150 is an NTC thermistor, which means its resistance decreases as the temperature increases. This property allows it to accurately measure temperature in electronic devices and systems.
Detailed Application Field Plans
- HVAC systems
- Consumer electronics
- Automotive industry
- Medical devices
- Industrial equipment
Detailed and Complete Alternative Models
- NTC Thermistors: MF52E1104F3950, MF52A2104F4250
- PTC Thermistors: MF72D1104F4300, MF58G1104F4100
This information provides a comprehensive overview of the MF52A1104F4150, covering its basic information, specifications, pin configuration, functional features, advantages and disadvantages, working principles, application field plans, and alternative models.
10个与MF52A1104F4150在技术解决方案中的应用相关的常见问题及解答
What is MF52A1104F4150?
- MF52A1104F4150 is a type of NTC thermistor, which is a temperature-sensitive resistor used in various electronic devices and systems.
What are the typical applications of MF52A1104F4150?
- MF52A1104F4150 is commonly used in temperature measurement and control systems, such as in HVAC systems, battery management, and industrial equipment.
What is the resistance-temperature characteristic of MF52A1104F4150?
- The resistance of MF52A1104F4150 decreases as the temperature increases, following a specific curve that can be used for precise temperature measurements.
How accurate is MF52A1104F4150 in temperature sensing?
- MF52A1104F4150 has a high accuracy in temperature sensing, with a tolerance typically within a few degrees Celsius over a wide temperature range.
Can MF52A1104F4150 be used in harsh environments?
- Yes, MF52A1104F4150 is designed to withstand harsh environmental conditions and is suitable for use in rugged industrial applications.
What is the recommended operating voltage for MF52A1104F4150?
- The recommended operating voltage for MF52A1104F4150 is typically in the range of 3-5 volts, making it compatible with most electronic circuits.
Does MF52A1104F4150 require calibration?
- MF52A1104F4150 may require initial calibration to ensure accurate temperature readings, especially if used in critical applications.
Can MF52A1104F4150 be used for temperature compensation in electronic circuits?
- Yes, MF52A1104F4150 is often used for temperature compensation in electronic circuits to maintain stable performance across varying temperatures.
Is MF52A1104F4150 interchangeable with other NTC thermistors?
- While MF52A1104F4150 has specific characteristics, it can be replaced by similar NTC thermistors with comparable resistance-temperature profiles.
Where can I find detailed technical specifications for MF52A1104F4150?
- Detailed technical specifications for MF52A1104F4150 can be found in the manufacturer's datasheet or product documentation, providing information on its electrical and thermal properties.