Cantherm
图片可能具有代表性。
产品详情请参阅规格.
MF51B103F3380
查看详情 数据表

MF51B103F3380

Product Overview

  • Category: Electronic Component
  • Use: Temperature Sensor
  • Characteristics: High precision, small size, wide temperature range
  • Package: SMD (Surface Mount Device)
  • Essence: Accurate temperature measurement
  • Packaging/Quantity: Tape and reel packaging, 3000 pieces per reel

Specifications

  • Operating Temperature Range: -55°C to 125°C
  • Resistance at 25°C: 10kΩ ±1%
  • Tolerance: ±0.5°C (over -10°C to 85°C)

Detailed Pin Configuration

  • Pin 1: VCC
  • Pin 2: GND
  • Pin 3: Output

Functional Features

  • Accurate temperature sensing
  • Small form factor
  • Wide operating temperature range
  • Low power consumption

Advantages

  • High precision
  • Compact size
  • Versatile application
  • Reliable performance

Disadvantages

  • Limited temperature range compared to some alternatives
  • Sensitive to electromagnetic interference

Working Principles

The MF51B103F3380 operates based on the principle of resistance change with temperature. As the temperature changes, the resistance of the sensor varies, allowing for precise temperature measurement.

Detailed Application Field Plans

  • Industrial temperature monitoring and control systems
  • Automotive climate control systems
  • Consumer electronics for temperature regulation

Detailed and Complete Alternative Models

  • NTC thermistors such as MF52G103F3950
  • Digital temperature sensors like DS18B20

This temperature sensor, MF51B103F3380, is a versatile electronic component widely used in various industries due to its high precision and compact design. Its accurate temperature sensing capabilities make it suitable for applications requiring reliable temperature measurement and control.

Word count: 270

10个与MF51B103F3380在技术解决方案中的应用相关的常见问题及解答

  1. What is the MF51B103F3380?

    • The MF51B103F3380 is a type of NTC thermistor, commonly used for temperature sensing and control in various technical applications.

  2. What is the resistance value of the MF51B103F3380 at 25°C?

    • The resistance value of the MF51B103F3380 at 25°C is 10kΩ.

  3. What is the temperature range that the MF51B103F3380 can measure?

    • The MF51B103F3380 can measure temperatures within a range of -55°C to 155°C.

  4. How accurate is the MF51B103F3380 in temperature measurement?

    • The MF51B103F3380 has a high accuracy in temperature measurement, typically within ±1°C.

  5. What are the typical applications of the MF51B103F3380?

    • The MF51B103F3380 is commonly used in applications such as temperature sensing in electronic devices, battery management systems, and industrial automation.

  6. Can the MF51B103F3380 be used in liquid temperature measurement?

    • Yes, the MF51B103F3380 can be used for measuring liquid temperatures, but it's important to ensure compatibility with the specific liquid and its properties.

  7. Does the MF51B103F3380 require calibration?

    • The MF51B103F3380 may require initial calibration to ensure accurate temperature measurements, especially if used in critical or precise applications.

  8. What are the environmental conditions that the MF51B103F3380 can withstand?

    • The MF51B103F3380 can withstand typical environmental conditions found in electronic devices and industrial settings, but it's important to avoid extreme conditions that could damage the component.

  9. Can the MF51B103F3380 be used in high-voltage applications?

    • The MF51B103F3380 is designed for low-voltage applications and may not be suitable for use in high-voltage environments without proper isolation and protection.

  10. Are there any special considerations when soldering the MF51B103F3380 onto a circuit board?

    • When soldering the MF51B103F3380, it's important to follow the manufacturer's guidelines to prevent damage to the component due to excessive heat or mechanical stress during assembly.