Allegro MicroSystems, LLC
图片可能具有代表性。
产品详情请参阅规格.
ACS716KLATR-6BB-NL-T
查看详情 数据表

ACS716KLATR-6BB-NL-T

Introduction

The ACS716KLATR-6BB-NL-T is a current sensor belonging to the category of integrated circuits. This device is commonly used for measuring current in various electronic applications. It possesses unique characteristics and comes in a specific package, making it an essential component in many electrical systems.

Basic Information Overview

  • Category: Integrated Circuit
  • Use: Current sensing in electronic applications
  • Characteristics: High accuracy, low noise, compact size
  • Package: Surface mount
  • Essence: Accurate current measurement
  • Packaging/Quantity: Typically available in reels of 2500 units

Specifications

  • Operating Voltage: 3.0V to 5.5V
  • Current Sensing Range: ±16A
  • Output Voltage: 66mV/A
  • Bandwidth: 120kHz
  • Operating Temperature Range: -40°C to 125°C
  • Accuracy: ±1.5%

Detailed Pin Configuration

  1. V+
  2. V-
  3. Output
  4. GND
  5. NC (Not connected)
  6. NC (Not connected)

Functional Features

  • High accuracy current sensing
  • Low-noise output
  • Wide operating voltage range
  • Small form factor
  • Overcurrent detection capability

Advantages

  • Accurate current measurement
  • Wide operating voltage range
  • Compact size

Disadvantages

  • Limited current sensing range
  • Not suitable for high-power applications

Working Principles

The ACS716KLATR-6BB-NL-T operates based on the principle of Hall effect sensing. When a current flows through the sensor, it generates a magnetic field which is detected by the integrated Hall sensor. This information is then converted into a proportional voltage output.

Detailed Application Field Plans

This sensor is widely used in various applications such as: - Battery management systems - Motor control - Power supplies - Overcurrent protection circuits

Detailed and Complete Alternative Models

  • ACS712ELCTR-05B-T
  • ACS723LLCTR-10AU-T
  • ACS758KCB-150B-PFF-T

In conclusion, the ACS716KLATR-6BB-NL-T is a versatile current sensor with high accuracy and a wide operating voltage range, making it suitable for a variety of electronic applications.

Word count: 345

10个与ACS716KLATR-6BB-NL-T在技术解决方案中的应用相关的常见问题及解答

  1. What is the ACS716KLATR-6BB-NL-T?

    • The ACS716KLATR-6BB-NL-T is a fully integrated, Hall-effect-based linear current sensor IC with a low-resistance current conductor.

  2. What is the operating voltage range of the ACS716KLATR-6BB-NL-T?

    • The operating voltage range of the ACS716KLATR-6BB-NL-T is 3.0V to 5.5V.

  3. What is the typical output sensitivity of the ACS716KLATR-6BB-NL-T?

    • The typical output sensitivity of the ACS716KLATR-6BB-NL-T is 66mV/A.

  4. What is the maximum continuous current that the ACS716KLATR-6BB-NL-T can measure?

    • The ACS716KLATR-6BB-NL-T can measure a maximum continuous current of ±20A.

  5. What is the package type of the ACS716KLATR-6BB-NL-T?

    • The ACS716KLATR-6BB-NL-T is available in a small, low-profile surface-mount package.

  6. What are the typical applications of the ACS716KLATR-6BB-NL-T?

    • The ACS716KLATR-6BB-NL-T is commonly used in applications such as motor control, power management, and overcurrent fault detection.

  7. Does the ACS716KLATR-6BB-NL-T require an external power supply?

    • Yes, the ACS716KLATR-6BB-NL-T requires an external power supply within the specified operating voltage range.

  8. Is the ACS716KLATR-6BB-NL-T suitable for automotive applications?

    • Yes, the ACS716KLATR-6BB-NL-T is suitable for automotive applications due to its robust design and performance.

  9. What is the temperature range for operation of the ACS716KLATR-6BB-NL-T?

    • The ACS716KLATR-6BB-NL-T has an operating temperature range of -40°C to 125°C.

  10. Can the ACS716KLATR-6BB-NL-T be used for bidirectional current sensing?

    • Yes, the ACS716KLATR-6BB-NL-T supports bidirectional current sensing, making it suitable for various technical solutions.